Evolution of polymer blend morphologies during extrusion in a flat die
Article dans une revue avec comité de lecture
Résumé
The control of blend morphologies during process is of prime importance in order to predict the final properties of polymer blends. A coextrusion technique combined with static mixers was developed in order to smartly blend polymeric melts and to optimize the blend morphologies during the flow in static mixers [1]. The aim of this paper is to study the evolution of those blend morphologies during extrusion in a flat die. The effect of the viscosity ratio and the interfacial tension are also investigated. The experimental observations are confronted with numerical simulation results.
Fichier(s) constituant cette publication
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Documents liés
Visualiser des documents liés par titre, auteur, créateur et sujet.
-
Communication sans acteGERVAIS, Matthieu; ALKHUDER, A; GRANDMONTAGNE, A.; GUINAULT, Alain; SOLLOGOUB, Cyrille (2013)The significant increase of Waste Electric and Electronic Equipment (WEEE) has led to an important research in upgrading recycled engineering plastics by means of a blending technique. In particular, there is an interest ...
-
Article dans une revue avec comité de lectureBOUFARGUINE, Majdi; GUINAULT, Alain; MIQUELARD-GARNIER, Guillaume; SOLLOGOUB, Cyrille (Wiley-VCH Verlag, 2013)Blending poly(lactic acid) (PLA) with a small amount of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV; 10 wt%) using a custom multilayer co-extrusion process increases both ductility and gas barrier properties of ...
-
Article dans une revue avec comité de lectureTRI, Phuong Nguyen; DOMENEK, Sandra; GUINAULT, Alain; SOLLOGOUB, Cyrille (Wiley, 2013)The morphology and miscibility of commercial poly(lactide) (PLA)/poly(b-hydroxybutyrate) (PHB, from 5 to 20 wt %) blends prepared by melt extrusion method, were investigated using differential scanning calorimetry (DSC) ...
-
Article dans une revue avec comité de lectureRASSELET, Damien; RUELLAN, Alexandre; GUINAULT, Alain; MIQUELARD-GARNIER, Guillaume; SOLLOGOUB, Cyrille; FAYOLLE, Bruno (Elsevier, 2014)The thermo-oxidative degradation of polylactide (PLA) films was studied between 70 and 150 C. It was shown that the oxidative degradation of PLA leads to a random chain cission responsible for a reduction of the molar ...
-
Article dans une revue avec comité de lectureMESSIN, Tiphaine; FOLLAIN, Nadège; GUINAULT, Alain; MIQUELARD-GARNIER, Guillaume; SOLLOGOUB, Cyrille; DELPOUVE, Nicolas; GAUCHER, Valérie; MARAIS, Stéphane (Elsevier, 2017)The transport properties were specifically investigated from water and gas permeation kinetics, and the corresponding permeation parameters were determined. The confinement effect of MXD6 in the multilayer structure was ...