Flux Weakening Strategy Optimization for Five-Phase PM Machine with Concentrated Windings
Communication sans acte
Author
Date
2012Abstract
The paper applies an Efficient Global Optimization method (EGO) to improve the efficiency, in flux weakening region, of a given 5-phase Permanent Magnet (PM) machine. An optimal control for the four independent currents is thus defined. Moreover, a modification proposal of the machine geometry is added to the optimization process of the global drive. The effectiveness of the method allows solving the challenge which consists in taking into account inside the control strategy the eddy-current losses in magnets and iron. In fact, magnet losses are a critical point to protect the machine from demagnetization in flux-weakening region. But these losses, which highly depend on magnetic state of the machine, must be calculated by Finite Element Method (FEM) to be accurate. The FEM has the drawback to be time consuming. It is why a direct optimization using FEM is critical. EGO method, using sparingly FEM, allows to find a feasible solution to this hard optimization problem of control and design of multi-phase drive.
Files in this item
Related items
Showing items related by title, author, creator and subject.
-
Article dans une revue avec comité de lectureSome surrogate-assisted optimization techniques are applied in order to improve the performances of a 5-phase Permanent Magnet (PM) machine in the context of a complex model requiring computation time. An optimal control ...
-
Article dans une revue avec comité de lectureGONG, Jinlin; ZAHR, Hussein; TRABELSI, Mohamed; ASLAN, Bassel; SEMAIL, Eric; SCUILLER, Franck (Institute of Electrical and Electronics Engineers, 2018)In the context of traction drives with required torque transient capabilities and a classically wide flux weakening speed range, this paper gives design considerations of a particular Double-Polarity (DP) five-phase machine. ...
-
Article dans une revue avec comité de lectureZHAO, B.; GONG, J.; TONG, T.; XU, Y.; SEMAIL, Eric; NGUYEN, Ngac Ky; GILLON, Frédéric (Institute of Electrical and Electronics Engineers (IEEE), 2021)In this article, a novel five-phase fractional-slot concentrated winding (FSCW) with 20-slot/22-pole is presented. It benefits not only the advantages of conventional FSCW but also weak space harmonics of magnetomotive ...
-
Communication avec acteGONG, J.; TAN, F.; ZHAO, B.; SEMAIL, Eric; NGUYEN, Ngac Ky; GILLON, F.; BRACIKOWSKI, N. (IEEE, 2022-10)In this paper, a novel topology of five-phase fractional-slot concentrated winding (FSCW) with selective magnetomotive force (MMF) harmonic elimination is proposed. Compared to traditional FSCW with stator shift technique, ...
-
Communication avec acteTAN, F.; GONG, J.; ZHAO, Q.; NGUYEN, Ngac Ky; SEMAIL, Eric; BRACIKOWSKI, N.; GILLON, F. (IEEE, 2022-09)This paper proposes the design and development of a five-phase external rotor permanent magnet synchronous machine (PMSM) which is used for direct drive convey application. Firstly, the slot/pole combination of fraction ...