Mechanical and physico-chemical study of sulphur additives effect in milling of high strength steel
Article dans une revue avec comité de lecture
Auteur
Résumé
Most machining operations require the presence of a cutting fluid in order to ensure their success due to the intensity of thermal and mechanical conditions generated on the cutting tools. In some cases of severe machining, the fluid contributes to lubrication in a physicochemical way thanks to the additives it contains. This study aims to analyze the tribochemical mechanisms of lubrication during milling operations and subsequently at optimizing the lubricant formulation. The objective of this study is also to identify and to compare, the performance of various Extreme Pressure (EP) sulfur-containing additives, and to understand their action mechanisms in metal cutting. Physico-chemical analyses are carried out by means of Auger Electron Spectroscopy (AES) and X-ray Photoelectron Spectroscopy (XPS) with the purpose of detecting the nature of additive reaction products on the surfaces involved in cutting and correlating them with the milling results. The polysulfide additive is found to exhibit the best efficiency (decrease of specific cutting energy and tool wear) in the tested milling conditions. A correlation is found between the additive chemical reactivity and the milling test results.
Fichier(s) constituant cette publication
- Nom:
- LABOMAP_WEAR_FROMENTIN_2012.pdf
- Taille:
- 766.3Ko
- Format:
- Description:
- article principal
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Documents liés
Visualiser des documents liés par titre, auteur, créateur et sujet.
-
Communication avec acteBIERLA, Aleksandra; MARTIN, Jean-Michel; LE MOGNE, Thierry; MINFRAY, Clotilde; GENET, Nicole; FROMENTIN, Guillaume (Technische Akademie Esslingen, 2008)In order to correlate the effect of lubricant viscosity and base oil on the efficiency of a lubricant, we measure the variation of tapping torque according to ASTM D5619 standard. Three fully formulated lubricants containing ...
-
Article dans une revue avec comité de lectureBIERLA, Aleksandra; MARTIN, Jean-Michel; LE MOGNE, Thierry; GENET, Nicole; FROMENTIN, Guillaume (Wiley, 2008)This study aims at analyzing the tribochemical mechanisms of lubrication during the process of form tapping and consequently optimizing the formulation of the lubricant. In order to correlate the tribochemical reactions ...
-
Article dans une revue avec comité de lectureMINFRAY, Clotilde; BIERLA, Aleksandra; MARTIN, Jean-Michel; LE MOGNE, Thierry; FROMENTIN, Guillaume (Elsevier, 2014)Because a cutting fluid could be equally used for different cutting operations, this study proposed to investigate the behavior of a well-known extreme-pressure additive (pentasulfide) in both turning and milling operations ...
-
Article dans une revue avec comité de lectureThis paper presents the results of a study of lubrication in form tapping and aims at a better understanding of its effect. It appears that lubrication is of paramount importance. Oil with efficient high pressure additives ...
-
Communication avec acteBALAGEAS, Daniel; ROCHE, Jean-Michel (Société Française de Thermique / Congrès Français de Thermique - Thermique en conditions extrêmes, 29 mai - 1er juin 2012, Bordeaux, 2012)L’approche de la détection précoce développée pour la thermographie impulsionnelle, utilisant le concept de contraste émergent, est appliquée à la thermographie stimulée par chauffage en échelon. Une procédure d’identification ...