The effect of groove texture patterns on piston-ring pack friction
Article dans des revues avec comité de lecture
Résumé
A cylinder liner possesses fairly intricate surface requirements due to its complicated functions. It needs to provide adequate surface roughness to resist wear as well as to store and retain lubricants during high temperatures. The liner surface texture is anisotropic, produced by the honing process, with resultant deep visible scratches left on it [1]. The prominence of the honing grooves observed suggests that surface texture significantly affects ring-pack performance, although this effect is not clearly understood. In this paper, a numerical model was developed to investigate the effects of groove characteristics on the lubrication condition and friction at the interface between the piston ring and cylinder liner. This model aims to solve the average Reynolds equation, which depends on the real surface topographies of the cylinder liner, and describes the influence of surface irregularities on the lubricant flow under hydrodynamic lubrication conditions, considering lubricant film rupture and cavitations. Numerical results help to determine the optimum lateral groove characteristics to reduce friction and then noxious emissions.
Fichier(s) constituant cette publication
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Documents liés
Visualiser des documents liés par titre, auteur, créateur et sujet.
-
Article dans une revue avec comité de lectureMEZGHANI, Sabeur; YOUSFI, Mohammed; ZAHOUANI, Hassan;
EL MANSORI, Mohamed;
DEMIRCI, Ibrahim (Taylor & Francis, 2012)
Multistage abrasive finishing processes (grinding, polishing, honing, etc.) are commonly used to produce the geometrical properties of a surface to meet its technical functionalities in the operating characteristics of ... -
Communication avec acteThe reduction of friction and the limitation of emissions of greenhouse gases are the main objectives of the automotive industry. This energy e ciency is related to functionalization of the surface of ringpack tribo-system. ...
-
Article dans une revue avec comité de lectureFriction reduction, lower oil consumption, and limitation of greenhouse gases emissions are the chief objectives of the automotive industry in order to improve the environmental efficiency of vehicle engines. In this paper, ...
-
Article dans une revue avec comité de lectureJOLIVET, Simon; MEZGHANI, Sabeur; VARGIOLU, R.; ZAHOUANI, Hassan;
EL MANSORI, Mohamed (Elsevier, 2017)
Micro geometry of a gear tooth influences the contact durability and wear performance. In this paper, different gear tooth flanks have been manufactured by different finishing processes, which were then characterized using ... -
Article dans une revue avec comité de lectureDEMIRCI, Ibrahim; MEZGHANI, Sabeur; YOUSFI, Mohammed; EL MANSORI, Mohamed (American Society of Mechanical Engineers, 2014-01)Determining friction is as equally essential as determining the film thickness in the lubricated contact, and is an important research subject. Indeed, reduction of friction in the automotive industry is important for ...