Effect of duplex treatments by plasma nitriding and triode sputtering on corrosion behaviour of 32CDV13 low alloy steel
Article dans une revue avec comité de lecture
Author
Date
2006Journal
Surface and Coatings TechnologyAbstract
This paper presents corrosion behaviour of duplex treated low alloy steel. Different kinds of samples were tested: non-treated, plasma nitrided, ZrBN-triode sputtered and ZrBN-duplex treated samples. The corrosion behaviour was evaluated by electrochemical techniques (corrosion potential and polarisation resistance evolutions versus immersion time, potentiodynamic curves). The corrosion tests were carried out in neutral aqueous saline solution (NaCl 30 g L−1), naturally aerated. The composition and the structure of layers were determined by EDS and XRD, respectively, while the morphology was observed by SEM. Experimental results showed that the corrosion current density Icorr increased with decreasing white layer thickness in plasma nitrided specimens. The nitrides ε-Fe2 − 3N and γ′-Fe4N present in the white layer are nobler than the substrate but may promote, by galvanic effect, a localised corrosion through open porosity. The duplex treated specimens (nitriding+ZrBN coating) present better corrosion protection and enable to overcome the drawbacks of both techniques, mainly the porosity of the deposited films.
Files in this item
Collections
Related items
Showing items related by title, author, creator and subject.
-
Article dans une revue avec comité de lectureSAIED, Chahinez; CHALA, Abdelouahad; DJOUADI, Mohamed Abdou; CHEKOUR, Lounis; NOUVEAU, Corinne (Wiley-VCH Verlag, 2007)The excellent mechanical properties of chrome-vanadium low alloy steel usually obviate the need for expensive quench and tempering operations. Furthermore, the presence of a significant amount of nitride phases has generated ...
-
Article dans une revue avec comité de lectureLABIDI, Chafik; FERREIRA-MARTIN, Jean-Pierre; DJOUADI, Mohamed Abdou; NOUVEAU, Corinne; COLLET, Robert (Elsevier, 2007)This study deals with the development of Chromium Aluminium Nitride (CrAlN) hard coatings (by varying the nitrogen content in the plasma, the target bias voltage, the working pressure and the deposition time) and their ...
-
Article dans une revue avec comité de lectureLABIDI, Chafik; BENLATRECHE, Yacine; DJOUADI, Mohamed Abdou; NOUVEAU, Corinne; COLLET, Robert (Elsevier, 2009)The aim of this study is first to define the effect of a surface finishing such as sand-blasting on the geometry of a wood cutting tool and its wear resistance. In addition, the effectiveness of surface coatings like CrAlN ...
-
Article dans une revue avec comité de lectureTEMAM, Hachemi Ben; ZEROUAL, Larbi; CHALA, Abdelouahad; RAHMANE, Saad; NOUVEAU, Corinne (Wiley-VCH Verlag, 2007)Composite coatings suitable for protection against corrosion were prepared by electrodeposition of chloride-nickel coating containing silicon carbide particles maintained in the suspension. The Ni-SiC composite coatings ...
-
Article dans une revue avec comité de lectureTLILI, Brahim; MUSTAPHA, Nasri; BENLATRECHE, Yacine; GUILLEMOT, Gildas; LAMBERTIN, Michel; NOUVEAU, Corinne (Elsevier, 2010)The CrAlN coatings are a good alternative to conventional CrN coatings especially for high temperature oxidation-resistance applications. Different CrAlN coatings were deposited on silicon (100) by PVD (Physical vapor ...