Definition of a linear equivalent model for a non-linear system with impacts
Communication avec acte
Date
2012Abstract
Modal characteristics of non-linear system are typically studied through response to harmonic excitation and using various definitions of non-linear modes. However, few results are available for systems under broadband excitation. The end objective sought here is to generate a linear system, in some sense equivalent to the non-linear system, whose modal characteristics evolve with a level of non-linearity. The considered application is the contact non-linearity found between the tubes of heat exchangers and their support plates. Such tubes, present in nuclear plants, participate to the nuclear safety and can be significantly excited by the fluid flow, so that their dynamic behavior is critical. The turbulent nature of the flow implies broadband excitation and the small gaps between the tubes and the support plate generate very significant non-linear behavior. The proposed equivalent linear system is based on a bilateral contact law whose stiffness and damping characteristics evolve with the amplitude of excitation. A non-linear model is first validated by correlation with experiments. It is then shown that three different indicators (bandwidth of main resonance, operational modal analysis of non-linear power spectral density and correlation of operational deflection shapes) lead to similar values of contact stiffness and damping in the equivalent linear model. This model is hus shown to be a very efficient tool to analyze the impact of the amplitude dependence of the non-linear behavior in the considered system.
Files in this item
Related items
Showing items related by title, author, creator and subject.
-
Article dans une revue avec comité de lectureA better understanding of the relationship between the structure and functions of urban and suburban spaces is one of the avenues of research still open for geographical information science. The research presented in this ...
-
Article dans une revue avec comité de lectureMARTIN, Guillaume; BALMES, Etienne; CHANCELIER, Thierry (Elsevier, 2017)While modal identification is a mature subject, very few studies address the characterization of errors associated with components of a mode shape. This is particularly important in test/analysis correlation procedures, ...
-
Communication avec acteMARTIN, Guillaume; BALMES, Etienne; VERMOT DES ROCHES, Guillaume; CHANCELIER, Thierry (2015)To be confident in the prediction capability of a model, verification and validation steps are classically performed. Verification checks that the model is properly solved. Since the model used are fairly standard, this ...
-
Communication avec acteMARTIN, Guillaume; CHANCELIER, Thierry; VERMOT DES ROCHES, Guillaume; BALMES, Etienne (2018)In the presence of squeal, Operational Deflection Shapes (ODS) are classically performed to analyze behavior. A simple numeric example is used to show that two real shapes should dominate the response. This justifies an ...
-
Communication avec acteVERMOT DES ROCHES, Guillaume; REJDYCH, Gabriel; BALMES, Etienne; CHANCELIER, Thierry (2014)Numerical prototyping is widely used in industrial design processes, allowing optimization and limiting validation costs through experimental testing. Industrial applications nowadays focus on the simulation of complex ...