Experimental study of hydraulic transport of large particles in horizontal pipes
Article dans une revue avec comité de lecture
Date
2013Journal
Experimental Thermal and Fluid ScienceRésumé
This article presents an experimental study of the hydraulic transport of very large solid particles (above 5 mm) in an horizontal pipe. Two specific masses are used for the solids. The solids are spheres that are large with respect to the diameter of the pipe (5, 10 and 15%) or real stones of arbitrary shapes but constant specific mass and a size distribution similar to the tested spherical beads. Finally, mixtures of size and / or specific mass are studied. The regimes are characterized with differential pressure measurements and visualizations. The results are compared to empirical models based on dimensionless numbers, together with 1D models that are based on mass and momentum balance. A model for the transport of large particles in vertical pipes is also proposed and tested on data available in the Literature, in order to compare the trends that are observed in the present experiments in a horizontal pipe to the trends predicted for a vertical pipe. The results show that the grain size and specific mass have a strong effect on the transition point between regimes with a stationary bed and dispersed flows. The pressure drops are moreover smaller for large particles in the horizontal part contrary to what occurs for vertical pipes, and to the predictions of the empirical correlations.
Fichier(s) constituant cette publication
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Documents liés
Visualiser des documents liés par titre, auteur, créateur et sujet.
-
Article dans une revue avec comité de lectureNOURI, Hussain;
SARRAF, Christophe; REY, Robert;
RAVELET, Florent;
BAKIR, Farid (American Society of Mechanical Engineers, 2012)
An experimental study on the design of counter-rotating axial-flow fans was carried out. The fans were designed using an inverse method. In particular, the system is designed to have a pure axial discharge flow. The ... -
Article dans une revue avec comité de lectureCAMPOS–AMEZCUA, Rafael; CAMPOS–AMEZCUA, Alfonso; PALACIOS-GALLEGOS, Manuel; REY, Robert;
BAKIR, Farid;
KHELLADI, Sofiane (Elsevier, 2015)
This work presents the results of numerical simulation of unsteady cavitating flow through a two–bladed axial inducer. First, the analysis was carried out in a blade cascade, this two–dimensional simplified model, obtained ... -
Article dans une revue avec comité de lectureNGUYEN, Van-Thang; DANLOS, Amelie;
RAVELET, Florent;
DELIGANT, Michael; SOLIS, Moises;
KHELLADI, Sofiane;
BAKIR, Farid (EDP Sciences, 2021)
Centrifugal compressors are widely used in many industrial applications because of their advantages. However, these turbomachines suffer at a low-flow rate from instabilities, such as rotating stall and surge. That leads ... -
Article dans une revue avec comité de lecture
RAVELET, Florent; DANLOS, Amélie;
BAKIR, Farid; CROCI, Kilian;
KHELLADI, Sofiane;
SARRAF, Christophe (MDPI AG, 2020)
The present study focuses on the inception, the growth, and the potential unsteady dynamics of attached vapor cavities into laminar separation bubbles. A viscous silicon oil has been used in a Venturi geometry to explore ... -
Article dans une revue avec comité de lectureTOMOV, Petar; KHELLADI, Sofiane; RAVELET, Florent; SARRAF, Christophe; BAKIR, Farid; VERTENOEUIL, P. (Elsevier, 2015)The injection of bubbles into an already cavitating flow is a way of influencing the typical cavitating behavior. The present article deals with experiments on aerated and non-aerated cavitation in a transparent horizontal ...

