Study of the hot forging of weld cladded work pieces using upsetting tests
Article dans une revue avec comité de lecture
Date
2014Journal
Journal of Materials Processing TechnologyRésumé
This paper focuses on the hot forging of multi-material cladded work pieces using upsetting tests. Thecase study corresponds to gas metal arc welding cladding of a SS316L on a mild steel (C15). Experimentaltests and simulations using a slab model and the finite element method were performed using differenttemperatures and die/billet tribological conditions. As a result, a crack mode, specific to clad billets, wasobserved experimentally and can be predicted by the FE method using a Latham and Cockcroft criterion.The material distribution was well simulated by the FE method; in particular, the effects of the frictionat die/work piece interface on the crack occurrence, the material distribution and, to a lesser extent,the forging load are well predicted. However, the latter was underestimated, highlighting the fact thatthe effect of the dilution associated with the cladding process on the material behavior of the clad layercannot be neglected.
Fichier(s) constituant cette publication
- Nom:
- Study-of-the-hot-forging-of-we ...
- Taille:
- 3.878Mo
- Format:
- Description:
- Publication JMPT
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Documents liés
Visualiser des documents liés par titre, auteur, créateur et sujet.
-
Communication avec acteThe presented work is dedicated to studying the forgeability of bimaterial cladded billet. Hot upsetting tests of cylindrical low carbon steel (C15) billets weld cladded (MIG) by stainless steel (SS316L) are experimentally ...
-
Communication avec acteWeld cladding is employed to improve the service life of engineering components by increasing corrosion and wear resistance and reducing the cost. The acceptable multi-bead cladding layer depends on single bead geometry. ...
-
Article dans une revue avec comité de lectureWANG, Qian; XU, Shun; LECOMTE, Jean-Sébastien; SCHUMAN, Christophe; PELTIER, Laurent; SHEN, Xiao; SONG, Wenwen (Elsevier, 2019)Ti and its alloys have a variety of applications in aerospace industry and medical implants. The formation of hydride has been used in biomedical areas and can significantly influence the mechanical performance of materials. ...
-
Article dans une revue avec comité de lectureWANG, Qian; LECOMTE, Jean-Sébastien; SCHUMAN, Christophe; PELTIER, Laurent (Elsevier BV, 2022)In this work, the mechanical properties of hydride diffusion layer were thoroughly researched by nano indentation technique. For the first time, the clear section microstructure of hydride diffusion layer was revealed ...
-
Cobalt-based superalloy layers deposited on X38CrMoV5 steel base metal by explosion cladding process Article dans une revue avec comité de lectureA grade 25 cobalt-based superalloy in the form of a sheet 5 mm in thickness and a steel substrate of type X38CrMoV5 are joined by explosion cladding. The macrostructure and microstructure of the interface and of the co-based ...