Experimental & Numerical Study of the Hot Upsetting of Weld Cladded Billets
Communication avec acte
Author
WANG, JingcaiRAFIQ, MuhammadLU, Hao 
LANGLOIS, LaurentAbstract
The presented work is dedicated to studying the forgeability of bimaterial cladded billet. Hot upsetting tests of cylindrical low carbon steel (C15) billets weld cladded (MIG) by stainless steel (SS316L) are experimentally and numerically studied. Upsetting tests with different upsetting ratios are performed in different tribology conditions at 1050°C which is within the better forgeability temperature range of both substrate and cladding materials[ 1 ]. Slab model and finite-element simulation are conducted to parametrically study the potential forgeability of the bimaterial cladded billet. The viscoplastic law is adopted to model the friction at the die/billet interface. The friction condition at the die/billet interface has a great impact on the final material distribution, forging effort and cracking occurrence. With Latham and Cockcroft Criterion, the possibility and potential position of cracks could be predicted.
Files in this item
Related items
Showing items related by title, author, creator and subject.
-
Article dans une revue avec comité de lecture;LANGLOIS, Laurent; ; BIGOT, Regis; (Elsevier, 2014)
This paper focuses on the hot forging of multi-material cladded work pieces using upsetting tests. Thecase study corresponds to gas metal arc welding cladding of a SS316L on a mild steel (C15). Experimentaltests and ...
-
Communication avec acte;LANGLOIS, Laurent (American Institute of Physics, 2010)
Weld cladding is employed to improve the service life of engineering components by increasing corrosion and wear resistance and reducing the cost. The acceptable multi-bead cladding layer depends on single bead geometry. ...
-
Cobalt-based superalloy layers deposited on X38CrMoV5 steel base metal by explosion cladding process Article dans une revue avec comité de lecture;LANGLOIS, Laurent (Elsevier, 2008)
A grade 25 cobalt-based superalloy in the form of a sheet 5 mm in thickness and a steel substrate of type X38CrMoV5 are joined by explosion cladding. The macrostructure and microstructure of the interface and of the co-based ...
-
Article dans une revue avec comité de lecture;PESCI, Raphaël; LANGLOIS, Laurent; BECKER, Eric; BIGOT, Regis; (Elsevier, 2014)
Microstructure is of crucial importance to the flow behavior of semi-solid slurries during the thixoforging process. Therefore, a thorough understanding of the microstructure evolution is required. In order to achieve this, ...
-
Communication avec acte;BECKER, Eric; PESCI, Raphaël; LANGLOIS, Laurent (Trans Tech Publications, 2012)
The distribution of liquid at the semi solid state is one of the most important parameters for steel thixoforging. It has a great influence on the viscosity of the material, on the flows and finally on the final shape and ...
