Predetermination of Currents and Field in Short-Circuit Voltage Operation for an Axial-Flux Permanent Magnet Machine
Communication avec acte
Auteur
HENNERON, ThomasLOCMENT, FabricePIRIOU, Francis 
SEMAIL, EricRésumé
Risk of irreversible magnet demagnetization during short-circuit fault is analyzed in case of an axial-flux dual-rotor machine, using a three-dimensional finite-element method (3D-FEM). In order to validate the numerical model, calculated waveforms of the currents are compared with experimental results for short-circuit at low speeds. Then currents and magnetic flux density inside the magnets are computed for short-circuit at higher speeds in order to predetermine the maximum admissible speed for the machine.
Fichier(s) constituant cette publication
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Documents liés
Visualiser des documents liés par titre, auteur, créateur et sujet.
-
Identification of a 7-phase claw-pole starter-alternator for a micro-hybrid automotive application Communication avec acte; ;SEMAIL, Eric; ; ; ; (IEEE, 2008)
This paper deals with the identification of a new high power starter-alternator system, using both: a Finite Element Method (FEM) modeling and an experimental vector control. The drive is composed of a synchronous 7-phase ...
-
Article dans une revue avec comité de lecture; ;SEMAIL, Eric (Institute of Electrical and Electronics Engineers, 2006)
In this paper, a 7-phase Axial-flux Double-rotor Permanent Magnet Synchronous Machine is studied using analytical and Finite Element methods. This type of machine shows a higher sensitivity to the inductance harmonics and ...
-
Communication avec acte; ; ; ; ; ;SEMAIL, Eric (IEEE, 2008)
This paper deals with the modeling and the control of a new high power 12V Integrated Starter Alternator (ISA). This system is used to bring micro-hybrid functions to standard Internal Combustion Engine (ICE) vehicles. The ...
-
Article dans une revue avec comité de lecture;SEMAIL, Eric; KESTELYN, Xavier (EDP Sciences, 2008)
This paper deals with fault tolerant multiphase electrical drives. The quality of the torque of a vector-controlled Permanent Magnet (PM) Synchronous Machine supplied by a multi-leg Voltage Source Inverter (VSI) is examined ...
-
Article dans une revue avec comité de lecture;SEMAIL, Eric; KESTELYN, Xavier (Institute of Electrical and Electronics Engineers, 2008)
This paper deals with easy-to-implement control strategies when a seven-phase axial flux permanent magnet machine supplied by a seven-leg voltage source inverter is in fault operation mode. Using a vectorial multimachine ...