Mechanical properties, microstructure and crystallographic texture of magnesium AZ91-D alloy welded by Friction Stir Welding (FSW)
Article dans une revue avec comité de lecture
Abstract
The objective of the study was to characterize the properties of a magnesium alloy welded by friction stir welding (FSW). The results led to a better understanding of the relationship between this process and the microstructure and anisotropic properties of alloy materials. Welding principally leads to a large reduction in grain size in welded zones due to the phenomenon of dynamic recrystallization. The most remarkable observation was that crystallographic textures appeared from a base metal without texture in two zones: the thermo-mechanically affected and stir welded zones. The latter zone has the peculiarity of possessing a marked texture with two components on the basal plane and the pyramidal plane. These characteristics disappeared in the TMAZ, which had only one component following the basal plane. These modifications have been explained by the nature of the plastic deformation in these zones, which occurs at a moderate temperature in the TMAZ and high temperature in the SWZ.
Files in this item
Related items
Showing items related by title, author, creator and subject.
-
Article dans une revue avec comité de lectureWEIL, Hadrien; COURLEUX, Alice; BECK, Guillaume; BARRALLIER, Laurent; JÉGOU, Sébastien (Università di Cassino, 2016)The present study aims to develop an algorithm able to predict the fatigue lifetime of nitrided steels. Linear multi-axial fatigue criteria are used to take into account the gradients of mechanical properties provided by ...
-
Determination of residual stress in nitrided steels with transmission angle-dispersive diffraction Communication sans acteResidual stress analysis with transmission angle-dispersive diffraction is carried out on nitrided steels. It aims evaluating residual stresses within the ferritic matrix but also within secondary phases such as nano-scale ...
-
Article dans une revue avec comité de lectureANTOINAT, Léonard; BAROU, Jean-Luc; VIOT, Philippe; BARRALLIER, Laurent; KUBLER, Regis (Elsevier, 2015)Low velocity perforation of aeronautical aluminium alloy sheets 2024 T3 is studied in this paper. After a literature review on recent experiments and models of plate’s perforation, experimental results for 2 thicknesses ...
-
Communication avec acteIn this study, Stress Corrosion Cracking (SCC) produced for 304L austenitic stainless steel in different concentrations of chloride containing sulfuric acid solutions was analyzed using both Scanning Electron Microscope ...
-
Communication sans acteStress Corrosion Cracking (SCC) is a typical failure of engineering materials applied in corrosive environments. In light water reactors for example, this results in loss of electrical capacity and related costs of repair ...