Strain path's influence on the elastic behaviour of theTRIP 700 steel
Article dans une revue avec comité de lecture
Date
2013Journal
Materials Science and Engineering: ARésumé
This paper deals with the analysis of thestrain path's influence on the elastic behaviour of TRIP700 steel; it aims to validate the cyclic testing method to characterise inelastic behaviour of advanced high strength steels (AHSS). Different cyclic tests are done, where the strain path is changed from test to test. Large deformation strain gages are used to determine the inelastic behaviour of the specimens at macro-level. At a lower scale, stress measurements are carried out using the XRD technique during an in-situ tensile test: ferrite and austenite phases’stresses are measured before unloading and after loading again to study the strain path's influence. By means of this work it is confirmed that the elastic strain path has no influence on the unloading–loading of this TRIP steel. These results prove that conventional loading–unloading cyclic testing is a valid methodology for a detailed characterisation of the elastic modulus and reliable numerical modelling of springback.
Fichier(s) constituant cette publication
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Documents liés
Visualiser des documents liés par titre, auteur, créateur et sujet.
-
Article dans une revue avec comité de lectureGUIHEUX, Romain; BERVEILLER, Sophie; KUBLER, Régis; BOUSCAUD, Denis; PATOOR, Etienne; PUYDT, Quentin (Elsevier, 2017)During conventional shot peening on metastable austenitic steels, martensitic transformation occurs in additionto plastic straining. In this work, the impact of a single spherical steel shot on a AISI 301LN steel was ...
-
Article dans une revue avec comité de lectureThis article deals with the application of several X-ray and neutron diffraction methods to investigate the mechanics of a stress induced martensitic transformation in Cu-based shape memory alloy polycrystals. It puts ...
-
Communication avec acteBOUSCAUD, Denis; PATOOR, Etienne; MORAWIEC, Adam; BERVEILLER, Sophie; PESCI, Raphaël (Trans Tech Publications, 2014)The Kossel microdiffraction in a scanning electron microscope allows for local stress determination. This technique has been applied to monitor stress evolution within grains of austenite in the course of martensitic ...
-
Article dans une revue avec comité de lectureKossel microdiffraction in a scanning electron microscope enables determination of local elastic strains. With Kossel patterns recorded by a CCD camera and some automation of the strain determination process, this technique ...
-
Article dans une revue avec comité de lectureOUAHAB, Razane; PATOOR, Etienne; BERVEILLER, Sophie; PESCI, Raphaël (Trans Tech Publications Inc, 2011)In this study, the internal stress evolution of the ferrite phase of 16MND5-A508 has been determined using X-Ray Diffraction (XRD). The results of in situ tests combined with XRD analyses and performed at different ...