Sliding friction and wear performance of the nano-bioceramic α -Al 2 O 3 prepared by high energy milling
Article dans une revue avec comité de lecture
Author
FELLAH, MamounSAMAD, Mohammed AbdulLABAIZ, MohamedASSALA, OmarIOST, AlainAbstract
The structural evolution and morphological changes of the nanostructured α-Al2O3 powder using different milling times (1, 8, 16 and 24 h) were studied. It is observed that the crystallite size of the particles reduced to 2 nm after milling for 24 h. Morphological studies of powder particles indicated that the powder particle size continuously decreases with increasing milling time. The sliding wear rate and wear coefficient of friction were lower in the nanocrystalline samples milled at 24 h at same applied load (3, 6 or 10 N). The improved friction and wear resistance is attributed to the finer microstructure of the sample milled for 24 h.
Files in this item
Related items
Showing items related by title, author, creator and subject.
-
Communication sans acte; ; ; ; ; ; ;
MONTAGNE, Alex (2016)
The current research was undertaken to study the improvement of the tribological behavior of nanocrystalline bioceramic, α-alumina sample, produced by the calculations of gibbsite at different temperatures (300 to 1200°C), ... -
Communication avec acte(Société Tribologique de France, 2013)Titanium and its alloys have been used as implant materials due to their very good mechanical and corrosion resistance and biocompatibility [1,2]. The most used biomaterials were commercially pure titanium (CP-Ti} issued ...
-
Communication avec acte(Centre pour Ia Communication Scientifique Directe, 2015)Titanium and its alloys have been used as implant materials due to their very good mechanical and corrosion resistance and biocompatibility [1,2]. The most used biomaterials were commercially pure titanium (CP-Ti} ...
-
Article dans une revue avec comité de lecture(EDP Sciences, 2014)Friction and wear plays an important role in determining the performance of biomaterials. To this end, the present research is carried out to understand the tribological behavior important biometallic alloy, Ti-6Al-4V under ...
-
Article dans une revue avec comité de lecture(Scientific Research, 2013)Titanium has been increasingly applied to biomedical application because of its improved mechanical characteristics, corrosion resistance and biocompatibility. However their application remains limited, due to the low ...