A numerical method to calculate the Abbott parameters: A wear application
Article dans une revue avec comité de lecture
Date
2007Journal
Tribology InternationalRésumé
A numerical technique was proposed to plot the Abbott curve and to compute its associated parameters defined by the DIN 4776 and ISO 13565 norms. These parameters were then extended and applied to non-sigmoid Abbott curves. By studying the discretisation errors, we show that a minimum of 200 intercepts, with parabolic interpolations between discretised data profiles, have to be taken into consideration to calculate the parameters as accurately as possible. Experimental profiles were eroded by means of a numerical wear model, and it was shown that the Abbott parameters correlate well with the wear model parameters. Our numerical estimations of Abbott parameters were performed for electro-eroded, tool machined, polished, worn and sandblasted surfaces. Manual measures were compared with our algorithmic method and it was shown that the difference is lower than 1% for Mr1 and Mr2 Abbott parameters, but the numerical technique leads to a lower dispersion.
Fichier(s) constituant cette publication
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Documents liés
Visualiser des documents liés par titre, auteur, créateur et sujet.
-
Article dans une revue avec comité de lectureVAN GORP, Adrien; BIGERELLE, Maxence; GRELLIER, Alain; IOST, Alain; NAJJAR, Denis (Elsevier, 2007)This paper proposes a new multi-scale measurement approach performed to compare the surface roughness and the visual aspect of polished surfaces. In this investigation, five specimens of glass moulds presenting different ...
-
Article dans une revue avec comité de lectureMARTEAU, Julie; BIGERELLE, Maxence; BOUVIER, Salima; IOST, Alain (Wiley-Blackwell: No OnlineOpen, 2014)The goal of this paper is to study the main uses of the residual imprint of the indentation test. It also discusses the different technologies and methods employed in this context. The difficulties encountered when trying ...
-
Article dans une revue avec comité de lectureXIA, Yang; BIGERELLE, Maxence; MARTEAU, Julie; MAZERAN, Pierre-Emmanuel; BOUVIER, Salima; IOST, Alain (Wiley-Blackwell: No OnlineOpen, 2014)A quantitative model is proposed for the estimation of macro-hardness using nanoindentation tests. It decreases the effect of errors related to the non-reproducibility of the nanoindentation test on calculations of ...
-
Article dans une revue avec comité de lectureIOST, Alain; RUDERMAN, Y.; BIGERELLE, Maxence (EDP Sciences, 2005)La caractérisation des propriétés mécaniques des revêtements, et plus particulièrement de leur dureté est d'une grande importance dans le milieu industriel et fait l'objet de nombreuses études. Le plus souvent, la mesure ...
-
Article dans une revue avec comité de lectureNAJJAR, Denis; BIGERELLE, Maxence; MIGAUD, Henri; IOST, Alain (Elsevier, 2005)The degradation of the femoral head roughness caused by scratching is known to increase the wear rate of the polyethylene counterface of the Charnley total hip prostheses and therefore to have an impact on osteolysis. The ...