Microstructure Characterization of a Nitrided Fe- 3wt.%Cr-0.3wt.%C Model Alloy by Anomalous Small Angle X-ray Scattering
TypeCommunications avec actes
Nitriding is a thermo-chemical surface treatment of steels providing an improved fatigue and wear resistance. This treatment is based on nitrogen diffusion involving the precipitation of nano-scaled nitrides from the solid solution at the near surface of the nitrided piece. Nitriding involves a complex microstructural evolution both in time and depth including diffusion of nitrogen and precipitation of nitrides but also coarsening and dissolution of carbides resulting in diffusion of carbon. However the chemical composition of nano-scaled precipitates remains controversial, in particular regarding the iron content in nano-nitrides that may substitute alloying elements. In this framework, anomalous small-angle X-ray scattering was used to bring quantitative data on the distribution and composition of the nano-scaled phases in a Fe-3Cr-0.3C steel as a function of depth.
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Visualiser des documents liés par titre, auteur, créateur et sujet.
DUMONT, Myriam; MORFIN, I.; DE GEUSER, F.; COMMIN, Loreleï; LEGENDRE, F.; MAUGIS, P.; JEGOU, Sébastien; BARRALLIER, Laurent (2014)Anomalous small-angle X-ray scattering (ASAXS) is a technique developed in the 1980s. It offers the opportunity to go further in the investigation of nano-objects by providing chemical information besides characteristic ...
Determination of the volume fraction of precipitates in a nitrided Fe- 0.354 wt% C-2.93 wt% Cr model alloy by anomalous small angle X-ray scattering JEGOU, Sébastien; DUMONT, Myriam; BARRALLIER, Laurent (Elsevier, 2018)Anomalous small angle scattering (ASAXS) is a powerful non-destructive technique that can provide char- acteristic features of nanoscale precipitates such as the volume fraction, and chemical composition. In this paper, ...
Texture evolution in Nd:YAG-laser welds of AZ31 magnesium alloy hot rolled sheets and its influence on mechanical properties COMMIN, Loreleï; DUMONT, Myriam; ROTINAT, René; PIERRON, Fabrice; MASSE, Jean-Eric; BARRALLIER, Laurent (Elsevier, 2011)AZ31 hot rolled magnesium alloy presents a strong basal texture. Using laser beam welding (LBW) as a joining process induces high temperature gradients leading to major texture changes. EBSD was used to study the texture ...
COMMIN, Loreleï; DUMONT, Myriam; MASSE, Jean-Eric; BARRALLIER, Laurent (Elsevier, 2009)The temperature evolution during friction stir welding (FSW) and the resulting residual stresses of AZ31 Mg alloy were studied to get a better understanding of the mechanisms involved in this process. The relationship ...
Influence of the microstructural changes and induced residual stresses on tensile properties of wrought magnesium alloy friction stir welds COMMIN, Loreleï; DUMONT, Myriam; ROTINAT, René; PIERRON, Fabrice; MASSE, Jean-Eric; BARRALLIER, Laurent (Elsevier, 2012)Friction stir welding induces a microstructural evolution and residual stresses that will influence the resulting mechanical properties. Friction stir welds produced from magnesium alloy hot rolled plates were studied. ...