Phase transformation in AISI 304 stainless steel during in situ biaxial loading in SEM and with X-ray diffraction
Conférence invitée
Date
2015Abstract
Finally, the same in situ biaxial tensile tests were also performed with both SEM and XRD, first at low temperature in order to study the influence of temperature on the material behaviour and especially on martensite formation, and then on the same steel that was heat treated in order to increase its grain size and to study the grain size effect.
Files in this item
Related items
Showing items related by title, author, creator and subject.
-
Article dans une revue avec comité de lectureCAER, Célia; PESCI, Raphaël (Elsevier, 2017)The microstructural response of a coarse grained AISI 304 stainless steel submitted to biaxial tensile loading was investigated using SEM and X-ray diffraction. The specimen geometry was designed to allow for biaxial stress ...
-
Article dans une revue avec comité de lectureLARIBOU, Hicham; FRESSENGEAS, Claude; ENTEMEYER, Denis; JEANCLAUDE, Veronique; PESCI, Raphaël; TAZIBT, Abdel (Royal Society, The, 2012)The technology of nitrogen jets impacting surfaces at low temperature has recently been introduced for surface cleaning/stripping. Under the impact of the jet, the material surface undergoes a thermomechanical shock inducing ...
-
Micromachine d'essais mécaniques de type traction et compression ayant une accessibilité optimisée BrevetPESCI, Raphaël; BOMONT, Olivier; WARY, Marc; BIANCHIN, Jeremy; SIMON, Lionel; BOEHM, Daniel; HECKER, Jean-Michel; PEIFFERT, Xavier (2015)L'invention concerne une micromachine de traction destinée à être utilisée dans une enceinte de microscope électronique à balayage ou avec un appareil de diffraction, comportant deux mors (1) portés par deux supports, ...
-
Article dans une revue avec comité de lectureGU, Guochao; PESCI, Raphaël; LANGLOIS, Laurent; BECKER, Eric; BIGOT, Régis; GUO, M.X. (Elsevier, 2014)Microstructure is of crucial importance to the flow behavior of semi-solid slurries during the thixoforging process. Therefore, a thorough understanding of the microstructure evolution is required. In order to achieve this, ...
-
Conférence invitéeZAERA, Ramon; CASADO, Alvaro; RODRIGUEZ-MARTINEZ, José A.; RUSINEK, Alexis; PESCI, Raphaël; FERNANDEZ-SAEZ, José (2011)The predictions of the constitutive model agree with experimental results in terms of macroscopy stress-strain curves and volume fraction of martensite formed during loading