Effect of laser shock peening on the high temperature oxidation resistance of titanium
TypeArticles dans des revues avec comité de lecture
The effect of laser shock peening on the high temperature oxidation resistance of commercial pure titanium at high temperature (700 °C) was studied in long-time (3000 h) exposure under dry air. A reduction of the gain mass by a factor 4 was found for laser-shock peened (LSP) samples compared to untreated titanium, which supports the interest of laser-shock treatment for the improvement of high temperature resistance. Short-durations (10 h and 100 h) oxidation experiments, devoted to investigate the influence of the LSP treatment on the first stages of the oxidation process, were also carried out by TGA. Several techniques as scanning electron microscopy, hardness and roughness measurements, X-ray diffraction and X-ray photoelectron spectrometry, micro-Raman spectroscopy, nuclear reaction analysis and electron backscattered diffraction were used to characterize the sample after laser treatment and oxidations. The formation of a continuous nitrogen-rich layer between the oxide layer and the α-case area in LSP samples appears to be the key factor to explain the reduction of oxygen diffusion, and thus the improvement of the oxidation resistance of laser shocked titanium. Moreover, the grain-texture of LSP samples after oxidation can also explain the improvement of the high temperature oxidation resistance after long times exposures.
Showing items related by title, author, creator and subject.
LAVISSE, Luc; KANJER, Armand; BERGER, P.; OPTASANU, V.; GORNY, Cyril; PEYRE, P.; MONTESIN, T.; MARCO DE LUCAS, M.C. (ELSEVIER, 2020)Improving the high temperature (HT) resistance of titanium alloys is currently a technological challenge for extending their use in aerospace engines. Ti-Beta-21S is a metastable β titanium alloy specifically designed for ...
KANJER, Armand; OPTASANU, Virgil; LAVISSE, Luc; MARCO DE LUCAS, María Del Carmen; DEJARDIN, Steeve; FRANÇOIS, Manuel; BERGER, Pascal; PEYRE, Patrice; GORNY, Cyril; MONTÉSIN, Tony (Springer New York LLC, 2017)The excellent combination of light-weight and good mechanical properties makes titanium alloys attractive for compressor section components in gas turbine engines (temperature between 250 and 600 °C). However, above 600 ...
KANJER, Armand; OPTASANU, Virgil; LAVISSE, Luc; MARCO DE LUCAS, Maria Del Carmen; DEJARDIN, Steeve; FRANÇOIS, Manuel; BERGER, Pascal D.; PEYRE, Patrice; GORNY, Cyril; MONTÉSIN, Tony (Springer New York LLC, 2017)The excellent combination of light-weight and good mechanical properties makes titanium alloys attractive for compressor section components in gas turbine engines (temperature between 250 and 600 °C). However, above 600 ...
Optimization and comparison of porosity rate measurement methods of Selective Laser Melted metallic parts DE TERRIS, Thibaut; ANDREAU, Olivier; PEYRE, Patrice; ADAMSKI, Frédéric; KOUTIRI, Imade; GORNY, Cyril; DUPUY, Corinne (Elsevier B.V., 2019)The systematic occurrence of porosities inside selective laser melted (SLM) parts is a well-known phenomenon. In order to improve the density of SLM parts, it is important not only to assess the physical origin of the ...
Advances in pantographic structures: design, manufacturing, models, experiments and image analyses DELL’ISOLA, Francesco; SEPPECHER, Pierre; SPAGNUOLO, Mario; BARCHIESI, Emilio; HILD, François; LEKSZYCKI, Tomasz; GIORGIO, Ivan; PLACIDI, Luca; ANDREAUS, Ugo; CUOMO, Massimo; EUGSTER, Simon R.; PFAFF, Aron; HOSCHKE, Klaus; LANGKEMPER, Ralph; TURCO, Emilio; SARIKAYA, Rizacan; MISRA, Aviral; DE ANGELO, Michele; D’ANNIBALE, Francesco; BOUTERF, Amine; PINELLI, Xavier; MISRA, Anil; DESMORAT, Boris; PAWLIKOWSKI, Marek; DUPUY, Corinne; SCERRATO, Daria; PEYRE, Patrice; LAUDATO, Marco; MANZARI, Luca; GÖRANSSON, Peter; HESCH, Christian; HESCH, Sofia; FRANCIOSI, Patrick; DIRRENBERGER, Justin; MAURIN, Florian; VANGELATOS, Zacharias; GRIGOROPOULOS, Costas; MELISSINAKI, Vasileia; FARSARI, Maria; MULLER, Wolfgang; ABALI, Bilen Emek; LIEBOLD, Christian; GANZOSCH, Gregor; HARRISON, Philip; DROBNICKI, Rafał; IGUMNOV, Leonid; ALZAHRANI, Faris; HAYAT, Tasawar (Springer, 2019)In the last decade, the exotic properties of pantographic metamaterials have been investigated and different mathematical models (both discrete or continuous) have been introduced. In a previous publication, a large part ...