Influence of outer-layer finite-size effects on the dewetting dynamics of a thin polymer film embedded in an immiscible matrix
TypeArticles dans des revues avec comité de lecture
In capillary-driven fluid dynamics, simple departures from equilibrium offer the chance to quantitatively model the resulting relaxations. These dynamics in turn provide insight on both practical and fundamental aspects of thin-film hydrodynamics. In this work, we describe a model trilayer dewetting experiment elucidating the effect of solid, no-slip confining boundaries on the bursting of a liquid film in a viscous environment. This experiment was inspired by an industrial polymer processing technique, multilayer coextrusion, in which thousands of alternating layers are stacked atop one another. When pushed to the nanoscale limit, the individual layers are found to break up on time scales shorter than the processing time. To gain insight on this dynamic problem, we here directly observe the growth rate of holes in the middle layer of the trilayer films described above, wherein the distance between the inner film and solid boundary can be orders of magnitude larger than its thickness. Under otherwise identical experimental conditions, thinner films break up faster than thicker ones. This observation is found to agree with a scaling model that balances capillary driving power and viscous dissipation with a no-slip boundary condition at the solid substrate/viscous environment boundary. In particular, even for the thinnest middle-layers, no finite-size effect related to the middle film is needed to explain the data. The dynamics of hole growth is captured by a single master curve over four orders of magnitude in the dimensionless hole radius and time, and is found to agree well with predictions including analytical expressions for the dissipation.
Fichier(s) constituant cette publication
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Visualiser des documents liés par titre, auteur, créateur et sujet.
BIRONEAU, Adrien; SALEZ, Thomas; MIQUELARD-GARNIER, Guillaume; SOLLOGOUB, Cyrille (American Chemical Society, 2017)An experimental study was carried out to investigate the existence of a critical layer thickness in nanolayer coextrusion, under which no continuous layer is observed. Polymer films containing thousands of layers of ...
Impact on thermomechanical behaviour of a maleic anhydride grafted ABS on ABS/PC multi-layered blends GERVAIS, Matthieu; ALKHUDER, A; GRANDMONTAGNE, A.; GUINAULT, Alain; SOLLOGOUB, Cyrille (2013)The significant increase of Waste Electric and Electronic Equipment (WEEE) has led to an important research in upgrading recycled engineering plastics by means of a blending technique. In particular, there is an interest ...
RUELLAN, A; GUINAULT, Alain; SOLLOGOUB, Cyrille; CHOLLET, G; AIT-MADA, A; DUCRUET, Violette; DOMENEK, Sandra (Budapest University of Technology and Economics, 2015)The use of industrial by-products of the vegetable oil industry as ductility increasing additives of polylactide (PLA) was investigated. Vegetable oil deodorization condensates were melt-blended by twin-screw extrusion up ...
FERNANDES NASSAR, Samira; GUINAULT, Alain; DELPOUVE, Nicolas; DIVRY, Véronique; DUCRUET, Violette; SOLLOGOUB, Cyrille; DOMENEK, Sandra (Elsevier, 2017)Semicrystalline polylactide (PLA) films with controlled morphology were produced by thermal crystallization to optimize the oxygen barrier properties. The crystalline morphology of PLA at the scales of the lamella and the ...
Confinement effect in PC/MXD6 multilayer films: Impact of the microlayered structure on water and gas barrier properties MESSIN, Tiphaine; FOLLAIN, Nadège; GUINAULT, Alain; MIQUELARD-GARNIER, Guillaume; SOLLOGOUB, Cyrille; DELPOUVE, Nicolas; GAUCHER, Valérie; MARAIS, Stéphane (Elsevier, 2017)The transport properties were specifically investigated from water and gas permeation kinetics, and the corresponding permeation parameters were determined. The confinement effect of MXD6 in the multilayer structure was ...