Control Strategies for Non-sinusoidal Multiphase PMSM Drives in Faulty Modes under Constraints on Copper Losses and Peak Phase Voltage
Article dans une revue avec comité de lecture
Abstract
In the context of future Permanent Magnet Synchronous Machines (PMSMs) with a high number of phases (>7) in integrated drives, this paper proposes several control strategies when multiphase PMSMs with non-sinusoidal back electromotive forces (back-EMFs) operate in healthy and open-circuit faults. In all operation modes, the considered constraint on current is related to the maximum root mean square (RMS) current allowable in one phase of the machine. The constraint on voltage limits the maximum peak value of the phase voltage determined by the DC-bus voltage of the converter. When one or two phases are open-circuited, to maximize torque and respect the constraints, new current references obtained by several proposed methods in rotating and natural frames are imposed to the machine. Due to the non-sinusoidal waveform of back-EMFs and the considered constraints, numerical computations based on analytical formulations are required to obtain maximal torque-speed characteristics, including the flux-weakening operation. The usefulness of the proposed strategies is verified by numerical and experimental results.
Files in this item
Related items
Showing items related by title, author, creator and subject.
-
Communication avec acteYANAGIHARA, Keitaro; VU, Duc Tan; GONG, Jinlin; SEMAIL, Eric; DOS SANTOS MORAES, Tiago José; NGUYEN, Ngac Ky (IEEE, 2019)This paper presents new fault-tolerant control strategies for field-oriented control of 7-phase non-sinusoidal permanent magnet (PM) machines supplied by voltage source inverters (VSI). Single phase open-circuit fault is ...
-
Conférence invitéeThis paper proposes several easy-to-implement control strategies when seven-phase axial flux brushless DC machines with trapezoidal back electromotive forces operate in normal and faulty modes by taking into account ...
-
Communication avec acteTorque density is usually improved by injecting the third current harmonic for five-phase permanent magnet synchronous machine (PMSM). It increases the degrees of freedom of a multiphase drive. However, it also separates ...
-
Conférence invitéeZHANG, Hao; ZHAO, Benteng; GONG, Jinlin; XU, Yanliang; VU, Duc Tan; SEMAIL, Eric; DOS SANTOS MORAES, Tiago José; NGUYEN, Ngac Ky (IEEE, 2019)Compared to sinusoidal machines, a bi-harmonic machine (with only two harmonics of similar value in the electromotive force spectrum) can develop torque of comparable values under three kinds of supply: with only first or ...
-
Article dans une revue avec comité de lectureJOSE DOS SANTOS MORAES, Tiago; TRABELSI, Mohamed; NGUYEN, Ngac Ky; SEMAIL, Eric; MEINGUET, Fabien (Institution of Engineering and Technology, 2020)This paper investigates a real-time fault diagnostic of a transportation system which needs two drives with fault-tolerance capabilities. Because of constraints on the mass of the system and on the cost of the Voltage ...