Rheokinetic of polyurethane crosslinking time-temperature-transformation diagram for rotational molding
Article dans une revue avec comité de lecture
Date
2012Journal
Journal of Applied Polymer ScienceRésumé
In this work, the rheokinetic of polyurethane crosslinking was studied by different methods: differential scanning calorimetric (DSC), rheometry, and infrared spectrometry. The conversion ratio and the glass transition temperature were followed by time of reaction. The results of the isothermal and nonisothermal test were compared. The evolution of viscosity was measured at different frequencies. The intersection of these curves is considered as gel point. A simplified mechanism has been proposed for crosslinking reactions. Based on this mechanism, a kinetic model describing the evolution of reactive system was developed. This model then was compared with the results of experiments performed by infrared spectrometry. The time-temperature- transformation diagram was established showing the evolution of physical state change of the reactive system. This diagram may be used to evaluate the zone of rotomoldability of the reactive polyurethane.
Fichier(s) constituant cette publication
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Documents liés
Visualiser des documents liés par titre, auteur, créateur et sujet.
-
Article dans une revue avec comité de lectureRIVIERE, Sylvain; KHELLADI, Sofiane; FARZANEH, Sedigheh; BAKIR, Farid; TCHARKHTCHI, Abbas (Wiley-Blackwell, 2013)Reactive rotational molding (RRM) is a process to manufacture hollow plastic articles. Comparing to rotational molding of thermoplastics, it decreases the process cycle time due to the reactivity of the system. However, ...
-
Article dans une revue avec comité de lectureThe effect of molecular weight on the crystallization behavior of poly(lactic acid) (PLA) both isothermally and non-isothermally was studied using differential scanning calorimetry and polarized optical microscopy. Two ...
-
Article dans une revue avec comité de lectureHAMIDI, A.; FARZANEH, Sedigheh; NONY, Fabien; ORTEGA, Zaida; KHELLADI, Sofiane; MONZON, M.; BAKIR, Farid; TCHARKHTCHI, Abbas (Springer Verlag, 2015)This paper concerns the study of sintering phenomenon during rotational molding of polypropylene(PP),Polyvinylidenefluoride (PVDF) and Polymethyl methacrylate (PMMA). First, the coalescence (first step of sintering) of two ...
-
Article dans une revue avec comité de lectureABBASNEZHAD, Navideh; ZARBINI SEYDANI, Mohammad; ZIRAK, Nader; FARZANEH, Sedigheh; SHIRINBAYAN, Mohammadali; TCHARKHTCHI, Abbas (KeAi Publishing, 2021)The masks have always been mentioned as an effective tool against environmental threats. They are considered as protective equipment to preserve the respiratory system against the non-desirable air droplets and aerosols ...
-
Article dans une revue avec comité de lectureFARZANEH, Sedigheh; ABDALLAH-ELHIRTSI, Sofiane; ESMAEILLOU, Bardia; NONY, Fabien; BARON, A; TCHARKHTCHI, Abbas (Taylor & Francis, 2014)This study concerns the effect of thermal aging on mechanical properties of polyurethane. Polyurethane samples were exposed at 85° and 120°C under inert atmosphere. Mechanical tests were carried out on these samples the ...