Effect of waviness and roughness on cylinder liner friction
Article dans une revue avec comité de lecture
The tribological performance of piston ring-cylinder bore was investigated through deterministic mixed lubrication modeling. Bore topographies measured from regular honed Gray Cast Iron (GCI) to “Mirror-Like” coated bore surfaces were used in the investigation. In contrast with typical honed GCI bores composed of relatively well-distributed peaks and valleys, coated bores are composed of a much smoother plateau and localized deep pores. Simulation results indicated that coated bore surfaces generate significantly higher hydrodynamic pressure and lower asperity contacts when compared with regular GCI topographies. The influence of roughness filtering and the associated cut-offs values were also considered in the analysis, showing that the choice of cut-off affects both the predicted hydrodynamic and asperity contact pressures. Furthermore, the simulation results also revealed that most of the fluid pressure was generated by the honing grooves rather than by the localized pores present on coated bore surfaces.
Showing items related by title, author, creator and subject.
Study of angular cutting conditions using multiple scratch tests onto low carbon steel: An experimental-numerical approach Article dans une revue avec comité de lectureSERIACOPI, V.; MEZGHANI, S.; CREQUY, S.; MACHADO, I.F.; EL MANSORI, Mohamed; SOUZA, R.M. (Elsevier BV, 2019-04)Multiple parallel scratches are often analyzed to understand the material removal mechanisms due to abrasion. However, successive scratches with diﬀerent orientations may represent better the conditions found in machining ...
Orthogonal cut of SPS-sintered composites with ferrous matrix and Fe Mo S particles: Numerical and experimental analysis Article dans une revue avec comité de lectureSOUZA, Roberto M.; ORDOÑEZ, Michell F.C.; MEZGHANI, Sabeur; CREQUY, Samuel; FUKUMASU, Newton K.; MACHADO, Izabel F.; EL MANSORI, Mohamed (Elsevier, 2019)Metal-matrix composites with solid lubricant reinforcements may present a suitable alternative to improve the tribological behavior of sintered components. Besides the performance during the application, the presence of ...
Article dans une revue avec comité de lectureCHEGDANI, Faissal; BUKKAPATNAM, Satish T.S.; EL AMRI, Iskander; EL MANSORI, Mohamed (Elsevier, 2019)This paper aims to explore the thermal influence on the micro-tribo-mechanical behavior of natural fiber composites. Nanoindentation and scratch-test are used to characterize flax fibers reinforced polypropylene (PP) ...
Article dans une revue avec comité de lectureDEMIRCI, Ibrahim; MEZGHANI, Sabeur; YOUSFI, Mohammed; EL MANSORI, Mohamed (American Society of Mechanical Engineers, 2014-01)Determining friction is as equally essential as determining the film thickness in the lubricated contact, and is an important research subject. Indeed, reduction of friction in the automotive industry is important for ...
Impact of superficial surface texture anisotropy in helical slide and plateau honing on ring-pack performance Article dans une revue avec comité de lectureThe improvement of environment efficiency of automotive internal combustion engine becomes a fundamental objective. The cylinder engine surface texture considerably influences the functional performances of the ring-pack ...