Preparation of new proton exchange membranes using sulfonated poly(ether sulfone) modified by octylamine (SPESOS)
Type
Articles dans des revues avec comité de lectureDate
2011Journal
Materials Chemistry and PhysicsRésumé
Sulfonated poly(arylene ether sulfone) (SPES) has received considerable attention in membrane preparation for proton exchange membrane fuel cell (PEMFC). But such membranes are brittle and difficult to handle in operation. We investigated new membranes using SPES grafted with various degrees of octylamine. Five new materials made from sulfonated polyethersulfone sulfonamide (SPESOS) were synthetized with different grades of grafting. They were made from SPES, with initially an ionic exchange capacity (IEC) of 2.4 meq g−1 (1.3 H+ per monomer unit). Pristine SPES with that IEC is water swelling and becomes soluble at 80 °C, its proton conductivity is in the range of 0.1 S cm−1 at room temperature in aqueous H2SO4 1 M, similar to that of Nafion®. After grafting with various amounts of octylamine, the material is water insoluble; membranes are less brittle and show sufficient ionic conductivity. Proton transport numbers were measured close to 1.
Fichier(s) constituant cette publication
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Documents liés
Visualiser des documents liés par titre, auteur, créateur et sujet.
-
MABROUK, Walid; OGIER, Lionel; VIDAL, Serge; SOLLOGOUB, Cyrille; MATOUSSI, F.; FAUVARQUE, J.F (ELSEVIER, 2013)Synthesis and characterization of new ion exchange membranes made from chlorosulfonated polyethersul- fone (SO2Cl-PES) crosslinked by polyaminated crosslinking reagents have been performed. Two examples are described: one ...
-
MABROUK, Walid; OGIER, Lionel; SOLLOGOUB, Cyrille; VIDAL, Serge; MATOUSSI, Fatma; FAUVARQUE, Jean François (Taylor and Francis, 2015)Two new types of proton exchange membranes used in proton exchange membrane fuel cell (PEMFC) were synthesized from sulfochlorinated polyethersulfone (PES (polyarylethersulfone)–SO2Cl). One, called S-PESB, was obtained by ...
-
NAJJAR, Walid; PUPIN, Cédric; LEGRAND, Xavier; BOUDE, Serge; SOULAT, Damien; DAL SANTO, Philippe (SAGE Publications, 2014)During the preforming stage of woven reinforcement, in the first step of the RTM process, frictional phenomenon occurring at the tool/reinforcement interfaces and the reinforcement/reinforcement interfaces is one of the ...
-
Analysis of the blank holder force effect on the preforming process using a simple discrete approach NAJJAR, Walid; LEGRAND, Xavier; DAL SANTO, Philippe; SOULAT, Damien; BOUDE, Serge (Trans Tech Publications, 2013)Simulation of the dry reinforcement preforming, first step of the Resin Transfer Moulding process, become necessary to determine the feasibility of the forming process, compute the fiber directions in the final composite ...
-
WANG, Damping; MAHE, Gaël; FANG, Junying; PISCIONE, Julien; COUVET, Serge; RETIERE, Didier; LAPORTE, Sébastien; VIDAL, Pierre-Paul (British Association of Sport & Exercise Medicine, 2018)Background: We are developing since 2010 with Thales and the Fédération Française de Rugby (FFR) M-Rex, a new kind of rugby scrum simulator. The study questioned whether it could improve safety and protect players from ...