Mechanical properties of multi-walled carbon nanotube/epoxy composites
Article dans une revue avec comité de lecture
Untreated and acid-treated multi-walled carbon nanotubes (MWNT) were used to fabricate MWNT/epoxy composite samples by sonication technique. The effect of MWNT addition and their surface modification on the mechanical properties were investigated. Modified Halpin-Tasi equation was used to evaluate the Young's modulus and tensile strength of the MWNT/epoxy composite samples by the incorporation of an orientation as well as an exponential shape factor in the equation. There was a good correlation between the experimentally obtained Young's modulus and tensile strength values and the modified Halpin-Tsai theory. The fracture surfaces of MWNT/epoxy composite samples were analyzed by scanning electron microscope.
Files in this item
Showing items related by title, author, creator and subject.
Viscoelastic properties of multi-walled carbon nanotube/epoxy composites using two different curing cycles Article dans une revue avec comité de lectureMONTAZERI, Arash; KHAVANDI, Alireza; JAVADPOUR, Jafar; TCHARKHTCHI, Abbas (Elsevier, 2010)Along with carbon nanotubes (CNT) morphology, impurity, and functionalization, polymer curing cycle is another important factor in determining the mechanical properties of the CNT/polymer composite samples. This work ...
Article dans une revue avec comité de lectureSHIRINBAYAN, Mohammadali; MONTAZERI, A.; NOURI SEDEH, M.; ABBASNEZHAD, Navideh; FITOUSSI, Joseph; TCHARKHTCHI, Abbas (Springer Verlag, 2021)Nowadays, polyamide 12 (PA-12) is considered as an interesting polymer in the rotomolding process to manufacture different pieces like the liner part in the storage hydrogen tank (type IV). In this study, the pure polyamide-12 ...
Article dans une revue avec comité de lectureASGARPOUR, Monir; BAKIR, Farid; KHELLADI, Sofiane; KHAVANDI, Alireza; TCHARKHTCHI, Abbas (Wiley-Blackwell, 2012)During rotational molding, a loosely packed, low-density powder compact transforms into a fully densified polymer part. This transformation is a consequence of particles sintering. Powder compact density evolution of the ...
Article dans une revue avec comité de lectureKALLEL, Achraf; KOUTIRI, I.; BABAEITORKAMANI, E.; KHAVANDI, A.; TAMIZIFAR, M.; SHIRINBAYAN, Mohammadali; TCHARKHTCHI, Abbas (2019)Fused filament fabrication (FFF) is an additive manufacturing (AM) process that provides physical objects commonly used for modeling, prototyping and production applications. The major drawback of this process is poor ...
Influence of loading conditions on the overall mechanical behavior of polyether-ether-ketone (PEEK) Article dans une revue avec comité de lectureABBASNEZHAD, Navideh; KHAVANDI, Alireza; FITOUSSI, Joseph; ARABI, Hossein; SHIRINBAYAN, Mohammadali; TCHARKHTCHI, Abbas (Elsevier, 2018)Testing methods have been developed to compare the mechanical responses and failure behavior of polyether-ether-keton (PEEK) thermoplastic polymer; under quasi-static, high strain rate tensile tests and fatigue loading. ...