Laser shock peening: toward the tse of pliable polid polymers for confinement
Type
Articles dans des revues avec comité de lectureAuthor
Abstract
This paper presents the first extensive study of the performances of solid polymers used as confinement materials for laser shock applications such as laser shock peening (LSP) as opposed to the exclusively used water-confined regime up to now. The use of this new confinement approach allows the treatment of metal pieces needing fatigue behavior enhancement but located in areas which are sensitive to water. Accurate pressure determination in the polymer confinement regime was performed by coupling finite element simulation and experimental measurements of rear free-surface velocity using the velocity interferometer system for any reflector (VISAR). Pressure could reach 7.6 and 4.6 GPa for acrylate-based polymer and cross-linked polydimethylsiloxane (PDMS), respectively. At 7 and 4.7 GW/cm2, respectively, detrimental laser breakdown limited pressure for acrylate and PDMS. These results show that the pressures produced were also as high as in water confinement, attaining values allowing the treatment of all types of metals with LSP and laying the groundwork for future determination of the fatigue behavior exhibited by this type of treated materials.
Files in this item
Related items
Showing items related by title, author, creator and subject.
-
RONDEPIERRE, Alexandre; ÜNALDI, Selen; ROUCHAUSSE, Yann; VIDEAU, Laurent; FABBRO, Rémy; CASAGRANDE, Olivier; SIMON-BOISSON, Christophe; BESAUCÉLE, Hervé; CASTELNAU, Olivier; BERTHE, Laurent (Elsevier, 2021)Processes using laser-shock applications, such as Laser Shock Peening or Laser Stripping require a deep understanding of both mechanical and thermal loading applied. We hereby present new experimental measurements of the ...
-
HADDAD, Mattieu; EMILIANI, Esteban; ROUCHAUSSE, Yann; COSTE, Frédéric; BERTHE, Laurent; DOIZI, Steeve; BUTTICÈ, Salvatore; SOMANI, Bhaskar Kumar; TRAXER, Olivier P. (Springer Verlag, 2017)Purpose: Holmium:YAG laser is the most used laser for urolithiasis. Generally, we use metallic scissors to cut the fiber tip to restore its effectiveness. Many cleaving methods have been described to avoid fiber damage and ...
-
BERTHE, Laurent; COURAPIED, Damien; EL KARNIGHI, Samy; PEYRE, Patrice; GORNY, Cyril; ROUCHAUSSE, Yann (Laser Institute of America, 2017)This paper presents a study on the confined interaction with water flow for two successive laser pulses. The dynamic of the renewal of water films after shock produced by the laser is observed using a high speed camera. ...
-
DUCOUSSO, Mathieu; BARDY, Simon; ROUCHAUSSE, Yann; BERGARA, Tomas; JENSON, Frédéric; BERTHE, Laurent; CUVILLIER, Nicolas (American Institute of Physics Inc., 2018)Intense acoustic shock waves were applied to evaluate the mechanical strength of structural epoxy bonds between a TA6V4 titanium alloy and a 3D woven carbon/epoxy composite material. Two bond types with different mechanical ...
-
PHIPPS, Claude R.; BONNAL, Christophe; MASSON, Frédéric; BOUSTIE, Michel; BERTHE, Laurent; SCHNEIDER, Matthieu; BATON, Sophie D; BRAMBRINK, Erik; CHEVALIER, Jean Marc; VIDEAU, Laurent; BOYER, Séverine A.E (Elsevier Ltd, 2018)New data on some materials at 80ps pulse duration and 1057 nm wavelength give us the option of proportionally combining them to obtain arbitrary values between 35 (aluminum) and 800 N/MW (POM, polyoxymethylene) for momentum ...