Usinage grande vitesse avec maîtrise globale du procédé appliqué aux matériaux difficiles et surfaces complexes. Usinage et mise en forme du bois. Traitements superficiels et optimisation des matériaux et alliages.
Plus d'informations sur le site du LaBoMaP :
labomap.ensam.eu

Recent Submissions

• 

  Effect of cryogenic assistance on hole shrinkage during Ti6Al4V drilling 

  Article dans une revue avec comité de lecture

  MERZOUKI, Johan; POULACHON, Gérard; ROSSI, Frédéric; AYED, Yessine; ABRIVARD, Guillaume (Springer Science and Business Media LLC, 2020-06-12)

  This paper focuses on the impact of cryogenic assistance on the drilling of Ti6Al4V titanium alloy. It develops a relation between the phenomenon of hole shrinkage and measurements performed either during or after the ...
• 

  Recent Advances on Cryogenic Assistance in Drilling Operation: A Critical Review 

  Article dans une revue avec comité de lecture

  LIU, Hongguang; BIREMBAUX, Hélène; AYED, Yessine; ROSSI, Frédéric; POULACHON, Gerard (ASME International, 2022-06-09)

  Drilling operation with cryogenic assistance is beneficial toward solving critical issues in machining difficult-to-cut materials and structures, especially in terms of improving surface integrity, elongating tool life, ...
• 

  A hybrid modelling approach for characterizing hole shrinkage mechanisms in drilling Ti6Al4V under dry and cryogenic conditions 

  Article dans une revue avec comité de lecture

  LIU, Hongguang; BIREMBAUX, Hélène; AYED, Yessine; ROSSI, Frédéric; POULACHON, Gérard; BIREMBAUX, Hélène (Springer Science and Business Media LLC, 2021-10-19)

  Hole shrinkage is a common phenomenon in drilling difficult-to-cut materials like Ti6Al4V due to their poor thermal properties and high elasticity, which can lead to increase in tool wear and decrease in surface integrity. ...
• 

  Impacts of flank wear and cooling strategies on evolutions of built-up edges, diffusion wear and cutting forces in Ti6Al4V machining 

  Article dans une revue avec comité de lecture

  LIU, Hongguang; AYED, Yessine; BIREMBAUX, Hélène; ROSSI, Frederic; POULACHON, Gerard (Elsevier BV, 2022-03-21)

  Titanium alloys are widely used in aerospace industries due to their excellent physical and mechanical performances, however, their poor machinability always induce fast tool wear. To better understand the interaction ...
• 

  A Method to Extract the Elastoplastic Properties of the Constituent Layers of Multilayer Coatings 

  Communication avec acte

  BEN AMMAR, Yamen; AOUADI, Khalil; BOUCHOUCHA, Faker; NOUVEAU, Corinne; BESNARD, Aurélien; MONTAGNE, Alex (Springer Nature Switzerland, 2024-08-28)

  This paper presents an approach to characterize the elastoplastic properties of the distinct layers, constituting multilayer coating. The proposed procedure utilizes nanoindentation load-displacement (P-h) curves and a non ...
• 

  A laboratory method to determine 3D fibre orientation around knots in sawn timber: case study on a Douglas fir specimen 

  Article dans une revue avec comité de lecture

  PENVERN, Hélène; DEMOULIN, Leyne; POT, Guillaume; VIGUIER, Joffrey; ROUX, Benjamin; HU, Min; OLSSON, Anders (Springer Science and Business Media LLC, 2024-08-09)

  The mechanical properties of structural timber largely depend on the occurrence of knots and on fibre deviation in their vicinities. In recent strength grading machines, lasers and cameras are used to detect surface ...
• 

  An Innovative Method Based on In Situ Deformometric Monitoring to Support Decisions for the Structural Restoration of a Historic Panel Painting 

  Article dans une revue avec comité de lecture

  MAZZANTI, Paola; MARCON, Bertrand; COCCHI, Linda; GOLI, Giacomo; RIPARBELLI, Lorenzo; UZIELLI, Luca (MDPI AG, 2024-08-07)

  This paper describes an innovative method developed by the authors to support basic decisions concerning the structural restoration of a large historical panel painting which had been damaged by inappropriate attachment ...

View more