Laboratoire Procédés et Ingénierie en Mécanique et Matériaux (PIMM): Soumissions récentes
Voici les éléments 1156-1162 de 1243
-
Article dans une revue avec comité de lecture(Elsevier, 2014)Laser-induced shock yields to a local tensile stress within a sample. This high strain rate stress can be used to verify the bond strength between two layers. This method has been applied to Carbon Fibre Reinforced Polymer ...
-
Role of strain induced crystallization and oxidative crosslinking in fracture properties of rubbers Article dans une revue avec comité de lecture(Elsevier, 2014)Tensile properties and crack propagation properties, especially critical strain energy release rate in mode I, GIC, have been used to investigate fracture properties of elastomers and their relationships with microstructure. ...
-
Article dans une revue avec comité de lecture(ASTEE/EDP Sciences, 2014)With the aim to study the long-term behavior of accessories used in the tap domestic water supply system, the Centre scientifique et technique du bâtiment (CSTB) has developed a tool dedicated to accelerated ageing tests ...
-
Article dans une revue avec comité de lecture(Elsevier, 2014)To increase the dependability of complex systems, one solution is to assess their state of health continuously through the monitoring of variables sensitive to potential degradation modes. When computed in an operating ...
-
Article dans une revue avec comité de lecture(Wiley-Blackwell, 2013)The poly ethylene terephthalate near the glass transition temperature highlights a strongly non linear elastic and viscous behaviour when biaxially stretched at high strain rates representative of the injection stretch ...
-
Article dans une revue avec comité de lecture(Elsevier, 2014)tThe thermo-oxidative behavior of unformulated (unfilled) samples of epoxy coatings has been studiedat five temperatures ranging from 70◦C to 150◦C. Two epoxy networks based on diglycidyl ether ofbisphenol A (DGEBA), ...
-
Article dans une revue avec comité de lecture(Elsevier, 2014)The present article reports a study of thermal oxidation of unstabilized polyamide 11 films at several temperatures (90–165 °C) under atmospheric pressure and under various oxygen pressures (up to 1.6 MPa) at 110 °C. The ...