Application of an experimental design to study AISI 4340 and 300M steels electropolishing in a concentrated perchloric/acetic acid solution
TypeArticles dans des revues avec comité de lecture
The objective of this study was to assess AISI 4340 and 300 M steels electropolishing performance in aconcentrated perchloric/acetic acid electrolyte. The statistical analysis on a two-level fractional design(FFD)24-1was proposed to define an adequate tool to describe the dissolved thickness and thefinalsurface via arithmetic roughness Ra. A compromise zone was defined for each steel by considering allthe requirements for both responses of each steel: dissolved thickness between 15–17μm andarithmetic roughness criteria less than 0.06μm
Showing items related by title, author, creator and subject.
Electrodeposition, characterization and corrosion behaviour of tin-20 wt.% zinc coatings electroplated from a non-cyanide alkaline bath DUBENT, Sébastien; MERTENS, Marc L.A.D.; SAURAT, M. (Elsevier, 2010)Tin-zinc alloy electroplated coatings are recognized as a potential alternative to toxic cadmium as corrosion resistant deposits because they combine the barrier protection of tin with the cathodic protection afforded by ...
Characterization and corrosion behaviour of grade 2 titanium used in electrolyzers for hydrogen production DUBENT, Sébastien; MAZARD, Alexandra (ELSEVIER, 2019)The decentralized production of hydrogen as a renewable energy vector targets large markets and potential applications: mobility, electricity and fixed heat generation, electricity storage in the form of gas. Hydrogen is ...
Quantify osteoarthritis gait at the doctor’s office: a simple pelvis accelerometer based method independent from footwear and aging BARROIS, Rémi; OUDRE, Laurent; MOREAU, Thomas; TRUONG, Charles; VAYATIS, Nicolas; BUFFAT, Sébastien; YELNIK, Alain; DE WAELE, Catherine; GREGORY, Thomas; LAPORTE, Sébastien; VIDAL, Pierre-Paul; RICARD, Danielle (Taylor & Francis, 2015)The gold standard to evaluate the severity of steoarthritis in the doctor’s office remains clinical scores (Bellamy 2002). The Western Ontario and McMaster Universities (WOMAC) oste- oarthritis index is the most largely ...
CAMPOCASSO, Sébastien; POULACHON, Gérard; COSTES, Jean-Philippe; BISSEY BRETON, Stéphanie (Elsevier, 2014)The cutting forces are often modelled using edge discretisation methodology. In finish turning, due to the smaller corner radii, the use of a local cutting force model identified from orthogonal cutting tests poses a ...
ROUX, Anthony; LECOMPTE, Jennyfer; GRAS, Laure-Lise; LAPORTE, Sébastien; IORDANOFF, Ivan (Taylor & Francis, 2014)Tear of the muscle-tendon complex (MTC) is one of the main causes of sport injuries (De Labareyre et al. 2005). However, the mechanisms leading to such injury are still unclear (Uchiyama et al. ...