Impact of Winding Parameters on Torque Level under Harmonic Injection in Multiphase Induction Machine
Communication avec acte
Abstract
Multiphase induction machines have the advantage of producing torque under different current harmonics. Theoretically, with some simplifications, the maximum produced torque can be considered proportional to the harmonic winding factor related to the injected current harmonic. However previous work has shown that this theoretical proportionality between the maximum developed torque and harmonic winding factors is not obtained in the case of a five-phase induction machine with eight-poles and fractional-slot tooth concentrated winding. This paper aims to investigate the effect of winding parameters, especially phase number, fundamental polarity and stator slots number, on the torque production in multiphase induction machine under harmonics injection. A comparative study is done between four five-phase winding configurations, with the same geometry and copper volume, under both first and third harmonic injection. Finally, a special 15-phase winding presenting better consistency between maximum developed torque and harmonic winding factors is proposed.
Files in this item
Related items
Showing items related by title, author, creator and subject.
-
Communication avec acteMEKAHLIA, Abdelhak; SEMAIL, Eric; SCUILLER, Franck; ZAHR, Hussein (IEEE, 2020)Multiphase induction machines are advantageous regarding speed range extension in comparison with three-phase induction machines. This paper investigates how to choose the connection between stator phases for a multiphase ...
-
Article dans une revue avec comité de lectureMEKAHLIA, Abdelhak; SEMAIL, Eric; SCUILLER, Franck; ZAHR, Hussein (MDPI, 2020)For three-phase induction machines supplied by sinusoidal current, it is usual to model the n-bar squirrel-cage by an equivalent two-phase circuit. For a multiphase induction machine which can be supplied with different ...
-
Communication avec acteMEKAHLIA, Abdelhak; SEMAIL, Eric; SCUILLER, Franck; HAMITI, Tahar; BENLAMINE, Raouf (2018)The paper investigates the effect of the bar number on the performances of a five-phase squirrel-cage induction machine with fractional-slot tooth concentrated winding. With a same stator, five different rotor bar numbers ...
-
Communication avec acteSCUILLER, Franck; ZAHR, Hussein; SEMAIL, Eric (2017)This paper addresses the design of a bi-harmonic five-phase Surface-mounted Permanent Magnet (SPM) machine for marine propulsion. The bi-harmonic characteristic results from the particular 20 slots-8 poles configuration ...
-
Communication avec acteZAHR, Hussein; SEMAIL, Eric; ASLAN, Bassel; SCUILLER, Franck (IEEE, 2016)The paper studies the impact of first and third current-harmonic repartition in a five-phase Permanent Magnet machine whose Electromotive Forces (emfs) have first and third harmonics of the same amplitude. With a five-phase ...