Influence of laser powder bed fusion process conditions and resulting microstructures on the electromagnetic properties of a 16MnCr5 steel
Article dans une revue avec comité de lecture
Auteur
DUPUY, CorinneBENABOU, AbdelkaderSHIHAB, SylvainMESSAL, O.PEYRE, Patrice 
CLENET, StephaneRésumé
16MnCr5 steel parts were additively manufactured by laser powder bed fusion in order to investigate the effect of microstructure on electromagnetic properties. As process parameters have a direct impact on the obtained microstructure, different conditions were used to manufacture samples on which magnetic and electrical tests were conducted. The obtained results were presented and discussed in terms of density, microstructure and electromagnetic properties. Finally, correlations have been demonstrated between the microstructure and the electromagnetic performances. Lower magnetic and electric properties were obtained with the higher porosity rates at low volume energy density. The microstructural effects were evidenced, through a decrease in magnetic properties with grain orientation, and an improvement with stress relief annealing.
Fichier(s) constituant cette publication
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Documents liés
Visualiser des documents liés par titre, auteur, créateur et sujet.
-
Article dans une revue avec comité de lecture; ;CLENET, Stephane; ; ; (Elsevier, 2021)
In this paper, the magnetic ageing of a bulk forged non-annealed magnetic core, used in claw pole synchronous machine, is investigated. The study is carried out by characterizing the material properties of two groups of ...
-
Article dans une revue avec comité de lecture; ;CLENET, Stephane; ; ; (Elsevier, 2020)
During the operation of Claw Pole (CP) machines, and for some operating loads, the magnetic core temperature can reach 180°C in some hot spots. As a consequence, the core electromagnetic properties may considerably change, ...
-
Advances in pantographic structures: design, manufacturing, models, experiments and image analyses Article dans une revue avec comité de lecture(Springer Verlag, 2019)In the last decade, the exotic properties of pantographic metamaterials have been investigated and different mathematical models (both discrete or continuous) have been introduced. In a previous publication, a large part ...
-
Article dans une revue avec comité de lecture(Institute of Problems of Mechanical Engineering, 2019)The purpose of this article is to show the basic characteristics of the so-called pantographic metamaterial. Here we underline how the microstructure provides some exotic properties and, in principle, implies the second ...
-
Texture control of 316L parts by modulation of the melt pool morphology in selective laser melting Article dans une revue avec comité de lecture; ; ; ; ; ;KOUTIRI, Imade; PESSARD, Etienne; SAINTIER, Nicolas (Elsevier, 2019)
In this study, 316L parts were fabricated with the selective laser melting additive layer manufacturing process using unidirectional laser scan to control their texture. The melt pool shape, microstructure and texture of ...