Influence of oxidizing and Nitriding parameters on nitrogen concentration of electrical steels
Article dans une revue avec comité de lecture
Date
2021Journal
Materials CharacterizationAbstract
The influence of oxidizing and nitriding parameters on the nitrogen concentration of grain-oriented electrical steels preliminary to the development of the final Goss texture was explored. Results show that the nitrogen enrichment is driven by a ferrite to austenite transformation during thermochemical treatments. Such a trans- formation is promoted by (i) a redistribution of ferrite-forming elements close to the surface during oxidizing prior to nitriding, (ii) the oxygen content within the oxide layer prior to nitriding, (iii) the temperature of oxidizing and nitriding, and (iv) the nitrogen enrichment during nitriding. Optimization of the nitrogen content, and thus the precipitation kinetics of alloying elements nitrides (e.g. inhibitors) required for the development of the final Goss texture can be controlled by an optimization of the oxide layer growth, the temperatures and gas mixture of nitriding.
Files in this item
Related items
Showing items related by title, author, creator and subject.
-
Article dans une revue avec comité de lectureGOEKJIAN, S.; GUITTONNEAU, Fabrice; BARRALLIER, Laurent;
JÉGOU, Sébastien (Materials Research Forum LLC, 2016)
This paper deals with the measurement of residual stresses in cementite after gas-nitriding of a 33CrMoV12-9 steel. During nitriding, precipitation of nanometric alloying elements nitrides and cementite at grain boundaries ... -
Article dans une revue avec comité de lecture
GOULMY, Jean-Patrick;
DEPRIESTER, Dorian; GUITTONNEAU, F.;
JÉGOU, Sébastien; BARRALLIER, Laurent (Elsevier BV, 2022-12)
Understanding the mechanisms at the microstructure scale is of great importance for modeling the behavior of materials at different scales. To this end, digital image correlation (DIC) is an effective measurement method ... -
Article dans une revue avec comité de lecture
GOULMY, Jean-Patrick; GUITTONNEAU, Fabrice;
JÉGOU, Sébastien; BARRALLIER, Laurent (Wiley, 2023-07-13)
Performing in situ scanning electron microscope (SEM) tests is an interesting way to visualise strain heterogeneities under mechanical loading. An essential step before performing the tests is to define the acquisition ... -
Communication sans acteLe rodage est un phénomène présent lors des premiers cycles de frottement qui modifie la surface de contact d’une pièce d’un point de vue géométrique, couplé à des modifications de propriétés mécaniques. Le rodage génère ...
-
Article dans une revue avec comité de lectureDevelopment and evolution of compressive residual stress during nitriding treatment are studied. A model carbon iron-based alloy Fe-3wt.%Cr-0.35wt.%C was nitrided in gas at 550 °C for different times. Microstructural ...