Improved Aerodynamics of a Hollow-Blade Axial Flow Fan by Controlling the Leakage Flow Rate by Air Injection at the Rotating Shroud
Article dans une revue avec comité de lecture
Axial flow fans are used in many fields in order to ensure the mass and heat transfer from air, chiefly in the heating, ventilation and air conditioning industry (HVAC). A more proper understanding of the airflow behavior through the systems is necessary to manage and optimize the fan operation. Computational fluid dynamics (CFD) represents a real tool providing the ability to access flow structures in areas that measuring equipment cannot reach. Reducing the leakage flow rate, inherent in operation, by synthetic-jet techniques improves performance. This paper presents the CFD results performed on a hollow blade fan developed by our team. The leakage flow is controlled by blowing air from 16 designated circular holes and arranged on the fan shroud. We discuss the results for two rotational speeds (1000 and 2000 rpm) and two injection rates (400 and 800 L/min). The numerical results consistent with the experimental show, for the low rotation speed and high injection ratio, significant gains in power (53%), torque (80%) and leakage flow rate (80%).
Fichier(s) constituant cette publication
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Visualiser des documents liés par titre, auteur, créateur et sujet.
Numerical Study on the Effect of an Off-Surface Micro-Rod Vortex Generator Placed Upstream NACA0012 Aerofoil Article dans une revue avec comité de lectureLARABI, Abderrahim; PEREIRA, Michael; RAVELET, Florent; AZZAM, Tarik; OUALLI, Hamid; MENFOUKH, Laiche; BAKIR, Farid (EDP Sciences, 2021)In this paper, 3D numerical simulations have been carried out to enhance the understanding of a flow over a passive control device composed of micro cylinder with, d/c = 1.34% placed in the vicinity of NACA0012 aerofoil ...
Experimental investigation of an actively controlled automotive cooling fan using steady air injection in the leakage gap Article dans une revue avec comité de lectureAZZAM, Tarik; PARIDAENS, Richard; RAVELET, Florent; KHELLADI, Sofiane; OUALLI, Hamid; BAKIR, Farid (SAGE Publications, 2017)In an axial fan, a leakage flow driven by a pressure gradient between the pressure side and the suction side occurs in the gap between the shroud and the casing. This leakage flow is in the opposite direction to the main ...
CFD Analysis to explain the Operating range extension observed during Operation in Co-rotating Mode of a Twin-impeller Centrifugal Compressor Article dans une revue avec comité de lectureNGUYEN, Van-Thang; DANLOS, Amelie; RAVELET, Florent; DELIGANT, Michael; SOLIS, Moises; KHELLADI, Sofiane; BAKIR, Farid (EDP Sciences, 2021)Centrifugal compressors are widely used in many industrial applications because of their advantages. However, these turbomachines suffer at a low-flow rate from instabilities, such as rotating stall and surge. That leads ...
Article dans une revue avec comité de lectureNGUYEN, Van-Thang; ABED, Cheikh Brahim; DANLOS, Amelie; RAVELET, Florent; PARIDAENS, Richard; DELIGANT, Michael; KHELLADI, Sofiane; BAKIR, Farid (American Society of Mechanical Engineers, 2021)The present study deals with a low pressure-ratio centrifugal compressor consisting of two counter-rotating rotors called a Counter-Rotating Centrifugal Compressor (CRCC). The design method based on the loss model was ...
Article dans une revue avec comité de lectureNGUYEN, Van Thang; DANLOS, Amélie; RAVELET, Florent; DELIGANT, Michael; SOLIS, Moises; KHELLADI, Sofiane; BAKIR, Farid (MDPI AG, 2021)Centrifugal compressors are widely used in many industrial fields such as automotive, aviation, aerospace. However, these turbomachines suffer instability phenomenon when the flow rate is too high or too low, called rotating ...