Mechanical behavior of polymer-based composites using fused filament fabrication under monotonic and fatigue loadings
Article dans une revue avec comité de lecture
The use of additive manufacturing has been widely developed in the industry due to its ability to make complex shapes. The use of reinforcing fibers has provided a wider design capability in this field. Due to the effect of the number of fibers reinforced used on the mechanical properties, the study of the obtained mechanical properties is of great importance. This paper presents the experimental findings of tensile loading and three points bending fatigue tests performed on polymer-based composites (Onyx (which is CF-PA6) and reinforced Onyx with continuous glass fiber (CF-PA6 + GF) using Fused Filament Fabrication. Tensile properties of various types of printing conditions (Solid, Triangular, Rectangular, and Hexagonal fill patterns) have been compared. The coupled frequency amplitude affects the nature of the overall fatigue response which can be controlled by the damage mechanisms accumulation and/or by the self-heating. For fatigue loading, self-heating has been observed and yielded a temperature rise to about 60°C which is more than the glass transition temperature of the polymer. Multi-scale damage analysis of the sample in fatigue showed that the first observed damage phenomenon corresponds to the debonding of the filaments which leads to the propagation of transverse cracks.
Showing items related by title, author, creator and subject.
Mathematical Modeling and Optimization of Fused Filament Fabrication (FFF) Process Parameters for Shape Deviation Control of Polyamide 6 Using Taguchi Method Article dans une revue avec comité de lectureSHAKERI, Zohreh; BENFRIHA, Khaled; SHIRINBAYAN, Mohammadali; AHMADIFAR, Mohammad; TCHARKHTCHI, Abbas (MDPI AG, 2021)Fused filament fabrication (FFF) is a layer-by-layer additive manufacturing (AM) process for producing parts. For industries to gain a competitive advantage, reducing product development cycle time is a basic goal. As a ...
Additive Manufacturing of Polymer-Based Composites Using Fused Filament Fabrication (FFF): a Review Article dans une revue avec comité de lectureAHMADIFAR, Mohammad; BENFRIHA, Khaled; SHIRINBAYAN, Mohammadali; TCHARKHTCHI, Abbas (Springer Science and Business Media LLC, 2021)In this review paper, recent developments in the Fused Filament Fabrication (FFF) approach are provided for composite materials. Influencing parameters in FFF process such as road width, print speed, layer ...
Effect of process parameters on thermal and mechanical properties of polymer‐based composites using fused filament fabrication Article dans une revue avec comité de lectureBENFRIHA, Khaled; AHMADIFAR, Mohammad; SHIRINBAYAN, Mohammadali; TCHARKHTCHI, Abbas (Wiley, 2021-11)The fused filament fabrication (FFF) process of polymer-based composites has been developed due to its capability to make complex geometries and shapes with reasonable mechanical properties. However, the improvement of ...
Effect of build orientation and post-curing of (meth)acrylate‐based photocurable resin fabricated by stereolithography on the mechanical behavior from quasi-static to high strain rate loadings Article dans une revue avec comité de lectureSHIRINBAYAN, Mohammadali; ZIRAK, Nader; SADDAOUI, Ouiza; MAMMERI, Amrid; AZZOUZ, Kamel; BENFRIHA, Khaled; TCHARKHTCHI, Abbas; FITOUSSI, Joseph (Springer Science and Business Media LLC, 2022-10)Stereolithography (SLA) is becoming an important fabrication method among the different additive manufacturing techniques. This study investigates the effect of high strain rate on mechanical behavior, considering the fact ...
Thermal, Tensile and Fatigue Behaviors of the PA6, Short Carbon Fiber-Reinforced PA6, and Continuous Glass Fiber-Reinforced PA6 Materials in Fused Filament Fabrication (FFF) Article dans une revue avec comité de lectureUtilization of additive manufacturing (AM) is widespread in many industries due to its unique capabilities. These material extrusion methods have been developed extensively for manufacturing polymer and polymer composite ...