The Use of Sacrificial Graphite-like Coating to Improve Fusion Efficiency of Copper in Selective Laser Melting
Article dans une revue avec comité de lecture
Abstract
Thin and ultrathin carbon films reduce the laser energy required for copper powder fusion in selective laser melting (SLM). The low absorption of infrared (IR) radiation and its excellent thermal conductivity leads to an intricate combination of processing parameters to obtain high-quality printed parts in SLM. Two carbon-based sacrificial thin films were deposited onto copper to facilitate light absorption into the copper substrates. Graphite-like (3.5 µm) and ultra-thin (25 nm) amorphous carbon films were deposited by aerosol spraying and direct current magnetron sputtering, respectively. The melting was analyzed for several IR (1.06 µm) laser powers in order to observe the coating influence on the energy absorption. Scanning electron microscopy showed the topography and cross-section of the thermally affected area, electron backscatter diffraction provided the surface chemical composition of the films, and glow-discharge optical emission spectroscopy (GDOES) allowed the tracking of the in-deep chemical composition of the 3D printed parts using carbon film-covered copper. Ultra-thin films of a few tens of nanometers could reduce fusion energy by about 40%, enhanced by interferences phenomena. Despite the lower energy required, the melting maintained good quality and high wettability when using top carbon coatings. A copper part was SLM printed and associated with 25 nm of carbon deposition between two copper layers. The chemical composition analysis demonstrated that the carbon was intrinsically removed during the fusion process, preserving the high purity of the copper part.
Files in this item
- Name:
- PIMM_3d-ICOMAS_2023_PEYRE.pdf
- Size:
- 4.572Mb
- Format:
- Description:
- The Use of Sacrificial Graphit ...
Related items
Showing items related by title, author, creator and subject.
-
Article dans une revue avec comité de lectureTEMPELAERE, Christine; PIERRART, Jérôme; LEFEVRE-COLAU, Marie-Martine; VUILLEMIN, Valérie; CUENOD, Charles-André; HANSEN, Ulrich; MIR, Olivier; SCALLI, Wafa; GREGORY, Thomas (Public Library of Science, 2016)BACKGROUND: MRI is the standard methodology in diagnosis of rotator cuff diseases. However, many patients continue to have pain despite treatment, and MRI of a static unloaded shoulder seems insufficient for best diagnosis ...
-
Communication avec acteDULUC, Marie-Christine; ELAYYADI, Isam; LE QUÉRÉ, Patrick; DARU, Virginie (Société Française de Thermique / Congrès Français de Thermique, 29 mai - 1 juin 2007, Île des Embiez, 2007)On étudie numériquement une configuration diphasique monodimensionnelle assimilable à un actuateur thermique de petites dimensions dans laquelle deux lames d'air sont séparées entre elle par une lame d'eau liquide. On ...
-
Article dans une revue avec comité de lecturePACQUENTIN, Wilfried; GOUTON, Lucille; CARON, Nadège; BRUSSIEUX, Charles; FOUCAULT, Marc; PEYRE, Patrice; MASKROT, Hicham; FAVIER, Véronique (Elsevier BV, 2021)The surface of Ni-based alloy 690 was treated using a sub-microsecond pulsed laser in order to reduce the amount of nickel released when the surface is exposed to the primary cooling system of pressurized water nuclear ...
-
Article dans une revue avec comité de lectureCRENN, Marie-Joséphine; DUBOT, Pierre; MIMRAN, Elie; FROMENTIN, Olivier; LEBON, Nicolas; PEYRE, Patrice (MDPI AG, 2021-12)Electrochemically anodized (EA) surfaces promise enhanced biological properties and may be a solution to ensure a seal between peri-implant soft tissues and dental transmucosal components. However, the interaction between ...
-
Advances in pantographic structures: design, manufacturing, models, experiments and image analyses Article dans une revue avec comité de lectureDELL’ISOLA, Francesco; SEPPECHER, Pierre; SPAGNUOLO, Mario; BARCHIESI, Emilio; HILD, François; LEKSZYCKI, Tomasz; GIORGIO, Ivan; PLACIDI, Luca; ANDREAUS, Ugo; CUOMO, Massimo; EUGSTER, Simon R.; PFAFF, Aron; HOSCHKE, Klaus; LANGKEMPER, Ralph; TURCO, Emilio; SARIKAYA, Rizacan; MISRA, Aviral; DE ANGELO, Michele; D’ANNIBALE, Francesco; BOUTERF, Amine; PINELLI, Xavier; MISRA, Anil; DESMORAT, Boris; PAWLIKOWSKI, Marek; DUPUY, Corinne; SCERRATO, Daria; PEYRE, Patrice; LAUDATO, Marco; MANZARI, Luca; GÖRANSSON, Peter; HESCH, Christian; HESCH, Sofia; FRANCIOSI, Patrick; DIRRENBERGER, Justin; MAURIN, Florian; VANGELATOS, Zacharias; GRIGOROPOULOS, Costas; MELISSINAKI, Vasileia; FARSARI, Maria; MULLER, Wolfgang; ABALI, Bilen Emek; LIEBOLD, Christian; GANZOSCH, Gregor; HARRISON, Philip; DROBNICKI, Rafał; IGUMNOV, Leonid; ALZAHRANI, Faris; HAYAT, Tasawar (Springer Verlag, 2019)In the last decade, the exotic properties of pantographic metamaterials have been investigated and different mathematical models (both discrete or continuous) have been introduced. In a previous publication, a large part ...