Identification of plastic constitutive parameters at large deformations from three dimensional displacement elds
TypeArticles dans des revues avec comité de lecture
The aim of this paper is to provide a general procedure to extract the constitutive parameters of a plasticity model starting from displacement measurements and using the Virtual Fields Method. This is a classical inverse problem which has been already investigated in the literature, however several new features are developed here. First of all the procedure applies to a general three-dimensional displacement eld which leads to large plastic deformations, no assumptions are made such as plane stress or plane strain although only pressure-independent plasticity is considered. Moreover the equilibrium equation is written in terms of the deviatoric stress tensor that can be directly computed from the strain eld without iterations. Thanks to this, the identi cation routine is much faster compared to other inverse methods such as nite element updating. The proposed method can be a valid tool to study complex phenomena which involve severe plastic deformation and where the state of stress is completely triaxial, e.g. strain localization or necking occurrence. The procedure has been validated using a three dimensional displacement eld obtained from a simulated experiment. The main potentialities as well as a rst sensitivity study on the inuence of measurement errors are illustrated.
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Visualiser des documents liés par titre, auteur, créateur et sujet.
Influence of the microstructural changes and induced residual stresses on tensile properties of wrought magnesium alloy friction stir welds COMMIN, Loreleï; DUMONT, Myriam; ROTINAT, René; PIERRON, Fabrice; MASSE, Jean-Eric; BARRALLIER, Laurent (Elsevier, 2012)Friction stir welding induces a microstructural evolution and residual stresses that will influence the resulting mechanical properties. Friction stir welds produced from magnesium alloy hot rolled plates were studied. ...
MOULART, Raphaël; ROTINAT, René; PIERRON, Fabrice (Elsevier, 2009)This work deals with the study of the local onset of microplasticity in a steel specimen under tensile test through the use of a full-field strain measurement method at the micrometric scale. The kinematic measurements ...
Full-field strain measurements at high rate on notched composites tested with a tensile Hopkinson bar MOULART, Raphaël; PIERRON, Fabrice; HALLETT, Stephen R.; WISNOM, Michael R. (EDP Sciences, 2009)The present paper deals with full-field strain measurement on open-hole tensile specimens submitted to high strain rate through a Hopkinson bar device. After having briefly explained the methodology (using an Ultra-High ...
Full-field strain measurement and identification of composites moduli at high strain rate with the Virtual Fields Method MOULART, Raphaël; PIERRON, Fabrice; HALLETT, Stephen R.; WISNOM, Michael R. (Springer, 2011)The present paper deals with full-field strain measurement on glass/epoxy composite tensile specimens submitted to high strain rate loading through a split Hopkinson pressure bar (SHPB) device and with the identification ...
Texture evolution in Nd:YAG-laser welds of AZ31 magnesium alloy hot rolled sheets and its influence on mechanical properties COMMIN, Loreleï; DUMONT, Myriam; ROTINAT, René; PIERRON, Fabrice; MASSE, Jean-Eric; BARRALLIER, Laurent (Elsevier, 2011)AZ31 hot rolled magnesium alloy presents a strong basal texture. Using laser beam welding (LBW) as a joining process induces high temperature gradients leading to major texture changes. EBSD was used to study the texture ...