The effect of applied stresses on the equilibrium moisture content in polymers
Type
Articles dans des revues avec comité de lectureAuthor
DERRIEN, KatellGILORMINI, PierreAbstract
The relation between saturation moisture content in a polymer and applied stresses is derived as a function of the coefficient of moisture expansion. The model predictions are compared favourably with experimental data taken from the literature.
Files in this item
Related items
Showing items related by title, author, creator and subject.
-
(Elsevier, 2013)Micromechanics modeling of the linear viscoelasticity of carbon-black filled styrene butadiene rubbers (SBR) shows that a simple representation of a spherical rigid-phase surrounded by rubber gum and embedded in an homogeneous ...
-
(Elsevier, 2015)The hydrolytic degradation of fully cured polyester-urethane networks polymerized in the presence of several weight ratios of triacetin was monitored by the residual concentration in elastically active chains obtained from ...
-
(Elsevier, 2017)The stress-strain response of a rubbery polymer network highly filled with micrometric glass beads was measured at low strain rate in uniaxial tension. The volume change of the glass bead filled material upon stretching ...
-
(Springer, 2010)Polyurethane networks have been prepared from a mix of tri- and quadriisocyanate and from two types of diols, polyether-based (with molar masses of 1,000, 2,000, and 4,000 g/mol) and polyester-based (1,035 g/mol). The ...
-
(American Chemical Society, 2011)Several carbon-black filled styrene-butadiene rubbers showed different sensibilities to the Mullins softening when submitted to cyclic uniaxial tension. In order to quantify this softening, a damage parameter was introduced. ...