Simulation of the stretch blow moulding process: from the modelling of the microstructure evolution to the end-use elastic properties of polyethylene terephthalate bottles
Article dans une revue avec comité de lecture
Date
2012Journal
International Journal of Material FormingRésumé
The whole stretch blow-moulding process of PET bottles is simulated at the usual process temperature in order to predict the elastic end-use properties of the bottles. An anisotropic viscoplastic constitutive law, coupled with microscopic variables, is dentified from uniaxial tensile tests performed at different strain rates and temperatures. The microstructure evolution is characterised by crystallinity measurements from interrupted tests and frozen samples. For each specimen tested, the Young modulus is measured at room temperature. Numerical simulations of the blow moulding process are run using the C-NEM method. A micromechanical modelling is post-processed after the simulation to predict the elastic properties. Predictions of Young modulus distributions in bottles are in agreement with the ones measured on blow-moulded bottles.
Fichier(s) constituant cette publication
- Nom:
- PIMM_IJFO-1_2012 -regnier.pdf
- Taille:
- 1.081Mo
- Format:
- Description:
- Article rang A
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Documents liés
Visualiser des documents liés par titre, auteur, créateur et sujet.
-
Article dans une revue avec comité de lectureIn order to simulate the thermoforming of a transparency, constitutive equations are proposed for the nonlinear viscoelastic behaviour of poly(methyl methacrylate) near glass transition temperature, which include large ...
-
Article dans une revue avec comité de lectureCHOUPIN, Tanguy; PARIS, C.; CINQUIN, Jacques; BRULÉ, Benoît; REGNIER, Gilles; FAYOLLE, Bruno (Elsevier, 2017)Isothermal melt and cold crystallizations of a poly(etherketoneketone) (PEKK) copolymer prepared from diphenyl ether (DPE), terephthalic acid (T) and isophthalic acid (I) with a T/I ratio of 60/40 have been investigated ...
-
Article dans une revue avec comité de lectureMacromolecular modifications of poly(etherketoneketone) (PEKK) copolymer prepared from diphenyl ether (DPE), terephthalic acid (T) and isophthalic acid (I) with a T/I ratio of 60/40 have been investigated above its melting ...
-
Article dans une revue avec comité de lectureDEBERTRAND, Louis; PARIS, Christophe; CINQUIN, Jacques; BRULÉ, Benoît; REGNIER, Gilles; FAYOLLE, Bruno (Wiley, 2019)Since poly(ether ketone ketone) (PEKK) is a good candidate as a matrix for composite structural parts, the mechanical properties of PEKK copolymers prepared from diphenyl ether, terephthalic acid (T), and isophthalic acid ...
-
Article dans une revue avec comité de lectureCHOUPIN, Tanguy; PARIS, Christophe; CINQUIN, Jacques; BRULÉ, Benoît; REGNIER, Gilles; FAYOLLE, Bruno (Elsevier, 2018)To quantify the isothermal crystallization kinetics of poly(ether ketone ketone) (PEKK), the integration of the crystallization peak measured using differential scanning calorimetry is rendered difficult due to the thermal ...