Experimental characterization of the iron losses variability in stators of electrical machines
Article dans une revue avec comité de lecture
Auteur
RAMAROTAFIKA, RindraBENABOU, AbdelkaderMIPO, Jean-Claude 
CLENET, StephaneRésumé
Manufacturing processes may introduce a significant variability on the magnetic properties of claw pole generator stators. The present work deals with the analysis of two groups of stator samples. The first group is composed of 28 slinky stators (SS) and the second group is composed of 5 stators, manufactured using laser cut stacked laminations (SL). Both groups are made from the same lamination grade and with the same geometrical dimensions. Characterization was carried out for several levels of excitation field at 50Hz. A noticeable variability has been observed on the iron losses for SS samples, whereas it appears to be not significant for SL samples. The loss separation technique has then been investigated for the SS samples. Results show that the variability of static losses is more important than the one of dynamic losses.
Fichier(s) constituant cette publication
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Documents liés
Visualiser des documents liés par titre, auteur, créateur et sujet.
-
Article dans une revue avec comité de lecture; ;CLENET, Stephane; ; (Institute of Electrical and Electronics Engineers, 2016)
The performances of electrical machines depend highly on the behavior of ferromagnetic materials. In some applications, these materials operate under DC polarization, i.e. when the magnetic field oscillates around a DC ...
-
Article dans une revue avec comité de lecture; ;CLENET, Stephane; ; ; (Elsevier, 2021)
In this paper, the magnetic ageing of a bulk forged non-annealed magnetic core, used in claw pole synchronous machine, is investigated. The study is carried out by characterizing the material properties of two groups of ...
-
Article dans une revue avec comité de lecture;DUMONT, Myriam; ; CLENET, Stephane; (Elsevier BV, 2022)
This article deals with the modelling of iron losses due to the magnetic ageing of electrical steels used in energy conversion devices. This phenomenon is the consequence of irreversible mechanisms in the material which ...
-
Communication avec acte; ; ; ; ; ; ; ;CLENET, Stephane (IEEE, 2017)
The manufacturing of a slinky stator core is the result of a sequence of difference processes: straightening, punching, rolling….. It has been shown in the literature that manufacturing processes lead to a degradation of ...
-
Article dans une revue avec comité de lecture; ; ; ; ;CLENET, Stephane (Institute of Electrical and Electronics Engineers, 2021)
In this paper, an experimental procedure is presented in order to handle magnetic measurements under uniaxial tensile stress reaching the plastic domain. The main advantage of the proposed procedure is that it does not ...