HIGH SPEED FUNCTIONALITY OPTIMIZATION OF FIVE-PHASE PM MACHINE USING 3RD HARMONIC CURRENT
Type
Articles dans des revues avec comité de lectureDate
2014Journal
International Journal for Computation and Mathematics in Electrical and Electronic EngineeringAbstract
Some surrogate-assisted optimization techniques are applied in order to improve the performances of a 5-phase Permanent Magnet (PM) machine in the context of a complex model requiring computation time. An optimal control of four independent currents is proposed in order to minimize the total losses with the respect of functioning constraints. Moreover, some geometrical parameters are added to the optimization process allowing a co-design between control and dimensioning. The effectiveness of the method allows solving the challenge which consists in taking into account inside the control strategy the eddy-current losses in magnets and iron. In fact, magnet losses are a critical point to protect the machine from demagnetization in flux-weakening region. But these losses, which highly depend on magnetic state of the machine, must be calculated by Finite Element Method (FEM) to be accurate. The FEM has the drawback to be time consuming. It is why, a direct optimization using FEM is critical. The response surface method (RSM) and the Efficient Global Optimization (EGO) algorithm consist in approximating the FEM by a surrogate model used directly or indirectly in the optimization process. The optimal results proved the interest of the both methods in this context
Files in this item
- Name:
- L2EP_COMPEL_2013_SEMAIL.pdf
- Size:
- 1005.Kb
- Format:
- Description:
- L2EP Compel preprin
Related items
Showing items related by title, author, creator and subject.
-
GONG, Jinlin; ZAHR, Hussein; SEMAIL, Eric; TRABELSI, Mohamed; ASLAN, Bassel; SCUILLER, Franck (2018)In the context of traction drives with required torque transient capabilities and a classically wide flux weakening speed range, this paper gives design considerations of a particular Double-Polarity (DP) five-phase machine. ...
-
JILIN, Gong; ASLAN, Bassel; SEMAIL, Eric; GILLON, Frédéric (2012)The paper applies an Efficient Global Optimization method (EGO) to improve the efficiency, in flux weakening region, of a given 5-phase Permanent Magnet (PM) machine. An optimal control for the four independent currents ...
-
ZAHR, Hussein; GONG, Jinlin; SEMAIL, Eric; SCUILLER, Franck (MDPI, 2016)The purpose of the paper is to present the potentialities in terms of the control of a new kind of PM synchronous machine. With five phases and electromotive forces whose first (E1) and third (E3) harmonics are of similar ...
-
YANAGIHARA, Keitaro; VU, Duc Tan; NGUYEN, Ngac Ky; GONG, Jinlin; SEMAIL, Eric; DOS SANTOS MORAES, Tiago José (IEEE, 2019)This paper presents new fault-tolerant control strategies for field-oriented control of 7-phase non-sinusoidal permanent magnet (PM) machines supplied by voltage source inverters (VSI). Single phase open-circuit fault is ...
-
ZHANG, Hao; ZHAO, Benteng; GONG, Jinlin; XU, Yanliang; VU, Duc Tan; NGUYEN, Ngac Ky; SEMAIL, Eric; DOS SANTOS MORAES, Tiago José (IEEE, 2019)Compared to sinusoidal machines, a bi-harmonic machine (with only two harmonics of similar value in the electromotive force spectrum) can develop torque of comparable values under three kinds of supply: with only first or ...