Experimental investigation of hydrodynamics of melt layer during laser cutting of steel
TypeArticles dans des revues avec comité de lecture
In laser cutting process, understanding of hydrodynamics of melt layer is significant, because it is an important factor which controls the final quality. In this work, we observed hydrodynamics of melt layer on kerf front in the case of laser cutting of steel with inert gas. The observation shows that the melt flow on the kerf front exhibits strong instability, depending on cutting velocity. In intermediate range of velocity, the flow on the central part of the kerf front is continuous, whereas the flow along the sides is discontinuous. It is firstly confirmed that the instability in the side flow is the cause of the striation initiation from the top part of the kerf. The origin of the instability is discussed in terms of instabilities in thermal dynamics and hydrodynamics. The proposed model shows reasonable agreement with experimental results.
Fichier(s) constituant cette publication
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Visualiser des documents liés par titre, auteur, créateur et sujet.
Experimental determination of temperature threshold for melt surface deformation during laser interaction on iron at atmospheric pressure HIRANO, Koji; FABBRO, Rémy; MULLER, Maryse (IOP, 2011)Recoil pressure is the principal driving force of molten metal in laser processing in the intensity range of 10^-1 ~ 10^2 MW/cm2. It is thus essential to estimate the recoil pressure in order to describe physical processes ...
Temperature measurement of laser heated metals in highly oxidizing environment using 2D single-band and spectral pyrometry MULLER, Maryse; FABBRO, Rémy; EL-RABII, Hazem; HIRANO, Koji (Laser Institute of America, 2012)Calibration and validation of two temperature measurement techniques both using optical pyrometry, usable in the framework of the study of the heated metals in highly oxidizing environments and more generally during laser ...
PANG, Shengyong; HIRANO, Koji; FABBRO, Rémy; JIANG, Tao (Laser Institute of America, 2015)It has been observed that the penetration depth during laser welding (LW) under vacuum or reduced ambient pressure could be significantly greater than that during welding under atmospheric pressure. Previous explanations ...
AMARA, El Hachemi; KHELOUFI, K; TAMSAOUT, T; FABBRO, Rémy; HIRANO, Koji (Springer, 2015)A theoretical approach based on a numerical simulation using experimental data is proposed as a contribution for the study of laser metal cutting under gas assistance. The aim is to simulate the stages of the kerf formation ...
Possible explanations for different surface quality in laser cutting with 1 micron and 10 microns beams HIRANO, Koji; FABBRO, Rémy (AIP, 2012)In laser cutting of thick steel sheets, quality difference is observed between cut surfaces obtained with 1 micron and 10 micron laser beams. This paper investigates physical mechanisms for this interesting and important ...