• français
    • English
    français
  • Login
Help
View Item 
  •   Home
  • Laboratoire Procédés et Ingénierie en Mécanique et Matériaux (PIMM)
  • View Item
  • Home
  • Laboratoire Procédés et Ingénierie en Mécanique et Matériaux (PIMM)
  • View Item
JavaScript is disabled for your browser. Some features of this site may not work without it.

Effect of the experimental parameters on the shape and formation kinetics of SiNWs formed by electroless chemical etching in aqueous AgNO3/HF/H2O2 solution

Article dans une revue avec comité de lecture
Author
NAFIE, Nesma
BEN RABHA, Mohamed
BOUAICHA, Mongi
ccBRAHAM, Chedly
86289 Laboratoire Procédés et Ingénierie en Mécanique et Matériaux [PIMM]

URI
http://hdl.handle.net/10985/7979
DOI
10.1002/pssc.201300172
Date
2014
Journal
physica status solidi (c)

Abstract

The discovery at the beginning of 1990 of carbon nanotubes awaked the interest for one-dimensional (1D) nanostructures. Currently, silicon nanowires (SiNWs) formed by electroless chemical etching in aqueous Ag- NO3/HF/H2O2 solution, arouse great interest due to their physical properties and potential applications. The understanding of physical-chemical phenomena that occur during the formation of SiNWs, the effect of etching parameters on their morphology, the formation mechanism and formation kinetic raise many questions. In this paper, we investigate the effect of etching parameters; namely AgNO3 concentration, HF concentration, etching time and the volume of H2O2 on the shape of obtained nanostructures. The formation kinetic was investigated by studying the effect of the etching time on the morphology of obtained nanostructures. SiNWs studied in this work were formed on a P type and (100) oriented monocrystalline silicon substrate. Characterization of formed SiNWs was performed using a scanning electron microscope (SEM).

Files in this item

Name:
PIMM-PSS-NAFIE-2014.pdf
Size:
1.608Mb
Format:
PDF
View/Open

Collections

  • Laboratoire Procédés et Ingénierie en Mécanique et Matériaux (PIMM)

Related items

Showing items related by title, author, creator and subject.

  • Role of machining defects and residual stress on the AISI 304 fatigue crack nucleation 
    Article dans une revue avec comité de lecture
    YAHYAOUI, Houda; BEN MOUSSA, Naoufel; SIDHOM, H; BEN FREDJ, N; ccBRAHAM, Chedly (Wiley-Blackwell, 2015)
    Machining defects as rebuilt material and dislodgement were often induced by cutting of difficult to machining AISI 304 stainless steel. Their density increases with a decreasing of cutting speed. The effect of these defects ...
  • Potential fatigue strength improvement of AA 5083-H111 notched parts by wire brush hammering: Experimental analysis and numerical simulation 
    Article dans une revue avec comité de lecture
    SIDHOM, Naziha; BEN MOUSSA, Naoufel; JANEB, Sameh; SIDHOM, Habib; ccBRAHAM, Chedly (Elsevier, 2014)
    The effects of milling as machining process and a post-machining treatment by wire-brush hammering, on the near surface layer characteristics of AA 5083-H111 were investigated. Surface texture, work-hardening and residual ...
  • Effect of machining processes on the residual stress distribution heterogeneities and their consequences on the stress corrosion cracking resistance of AISI 316L SS in chloride medium 
    Article dans une revue avec comité de lecture
    RHOUMA, Amir Ben; SIDHOM, Naziha; MAKHLOUF, Kamel; SIDHOM, Habib; GONZÁLEZ, Gonzalo; ccBRAHAM, Chedly (Springer Verlag, 2019)
    The effects of machining such as grinding and turning on the microstructural and mechanical changes of the machined surfaces of AISI 316L stainless steel (SS) have been studied. Surface aspects and surface defects have ...
  • Effects of finishing processes on the fatigue life improvements of electro-machined surfaces of tool steel 
    Article dans une revue avec comité de lecture
    GHANEM, Farhat; FREDJ, Nabil Ben; SIDHOM, Habib; ccBRAHAM, Chedly (Springer Verlag, 2011)
    Machining the EN X160CrMoV12 tool steel by electro-discharge machining (EDM) process generates significant modifications of microgeometrical, microstructural and mechanical properties of the upper layers of the machined ...
  • Correlation between microstructure and intergranular corrosion behavior of low delta-ferrite content AISI 316L aged in the range 550e700 C 
    Article dans une revue avec comité de lecture
    BEN RHOUMA, A; AMADOU, Tidiane; SIDHOM, Habib; ccBRAHAM, Chedly (Elsevier, 2017)
    The microstructure and the phase identification of austenitic stainless steel AISI 316L with low δ-ferrite content (δ ≤ 1%) and aged for up to 80 000 h at temperatures ranging from 550 to 700 °C were investigated by using ...

Browse

All SAMCommunities & CollectionsAuthorsIssue DateCenter / InstitutionThis CollectionAuthorsIssue DateCenter / Institution

Newsletter

Latest newsletterPrevious newsletters

Statistics

Most Popular ItemsStatistics by CountryMost Popular Authors

ÉCOLE NATIONALE SUPERIEURE D'ARTS ET METIERS

  • Contact
  • Mentions légales

ÉCOLE NATIONALE SUPERIEURE D'ARTS ET METIERS

  • Contact
  • Mentions légales