Dynamic cratering of graphite: Experimental results and simulations
TypeArticles dans des revues avec comité de lecture
The cratering process in brittle materials under hypervelocity impact (HVI) is of major relevance for debris shielding in spacecraft or high-power laser applications. Amongst other materials, carbon is of particular interest since it is widely used as elementary component in composite materials. In this paper we study a porous polycrystalline graphite under HVI and laser impact, both leading to strong debris ejection and cratering. First, we report new experimental data for normal impacts at 4100 and 4200 m s 1 of a 500-mm-diameter steel sphere on a thick sample of graphite. In a second step, dynamic loadings have been performed with a high-power nanosecond laser facility. High-resolution X-ray tomographies and observations with a scanning electron microscope have been performed in order to visualize the crater shape and the subsurface cracks. These two post-mortem diagnostics also provide evidence that, in the case of HVI tests, the fragmented steel sphere was buried into the graphite target below the crater surface. The current study aims to propose an interpretation of the results, including projectile trapping. In spite of their efficiency to capture overall trends in crater size and shape, semi-empirical scaling laws do not usually predict these phenomena. Hence, to offer better insight into the processes leading to this observation, the need for a computational damage model is argued. After discussing energy partitioning in order to identify the dominant physical mechanisms occurring in our experiments, we propose a simple damage model for porous and brittle materials. Compaction and fracture phenomena are included in the model. A failure criterion relying on Weibull theory is used to relate material tensile strength to deformation rate and damage. These constitutive relations have been implemented in an Eulerian hydrocode in order to compute numerical simulations and confront them with experiments. In this paper, we propose a simple fitting procedure of the unknown Weibull parameters based on HVI results. Good agreement is found with experimental observations of crater shapes and dimensions, as well as debris velocity. The projectile inclusion below the crater is also reproduced by the model and a mechanism is proposed for the trapping process. At least two sets of Weibull parameters can be used to match the results. Finally, we show that laser experiment simulations may discriminate in favor of one set of parameters.
Fichier(s) constituant cette publication
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Visualiser des documents liés par titre, auteur, créateur et sujet.
SEISSON, G; HEBERT, David; BERTRON, I; CHEVALIER, J.M; HALLO, L; LESCOUTE, Emilien; VIDEAU, Laurent; COMBIS, Patrick; GUILLET, F; BOUSTIE, Michel; BERTHE, Laurent (ELSEVIER, 2013)The cratering process in brittle materials under hypervelocity impact (HVI) is of major relevance for debris shielding in spacecraft or high-power laser applications. Amongst other materials, carbon is of particular interest ...
HEBERT, David; SEISSON, G; RULLIER, J.-L; BERTRON, I; HALLO, L; CHEVALIER, J.M; THESSIEUX, C; GUILLET, F; BERTHE, Laurent (The Royal Society Publishing, 2017)We present experiments and numerical simulations of hypervelocity impacts of 0.5 mm steel spheres into graphite, for velocities ranging between 1100 and 4500 m s−1. Experiments have evidenced that, after a particular ...
Penetration and cratering experiments of graphite by 0.5-mm diameter steel spheres at various impact velocities SEISSON, G; HEBERT, D; HALLO, L; CHEVALIER, J.M; GUILLET, F; BERTHE, Laurent; BOUSTIE, Michel (ELSEVIER, 2014)Cratering experiments have been conducted with 0.5-mm diameter AISI 52100 steel spherical projectiles and 30-mm diameter, 15-mm long graphite targets. The latter were made of a commercial grade of polycrystalline and porous ...
Numerical study of laser ablation on aluminum for shock-wave applications: development of a suitable model by comparison with recent experiments BARDY, Simon; AUBERT, Bertrand; BERTHE, Laurent; COMBIS, Patrick; HEBERT, David; LESCOUTE, Emilien; RULLIER, Jean-Luc; VIDEAU, Laurent (2017)In order to control laser-induced shock processes, two main points of interest must be fully understood: the laser–matter interaction generating a pressure loading from a given laser intensity profile and the propagation ...
Observation of the shock wave propagation induced by a high-power laser irradiation into an epoxy material ESCAULT, Romain; BERTHE, Laurent; BOUSTIE, Michel; TOUCHARD, Fabienne; LESCOUTE, Emilien; SOLLIER, Arnaud; MERCIER, Patrick; BERNIER, Jacky (IOP PUBLISHING, 2014)The propagation of laser-induced shock waves in a transparent epoxy sample is investigated by optical shadowgraphy. The shock waves are generated by a focused laser (3 ns pulse duration—1.2 to 3.4TWcm−2) producing pressure ...