Five-phase version of 12slots/8poles three-phase Synchronous Machine for Marine-propulsion
Communication avec acte
Date
2014Résumé
Multiphase machines are widely used in electric marine propulsion especially because of their fault-tolerance which allows to guarantee the propulsion even if a fault occurs in the electrical system. Besides, the 12 slots/8 poles three-phase machine (12/8/3 machine) with fractional slot concentrated windings is known for its low level of permanent Magnet eddy currents losses, making it adequate for compact high speeds applications. Since this interesting property is due to a 0.5 value for the number of slots per pole and per phase (spp=0.5), then the paper examines a five-phase 20 slots/8poles (20/8/5 machine) fault tolerant machine whose spp=0.5. Using an analytical model, the copper losses and an estimation of the magnet losses for the two machines are presented and a comparison is done between the two machines. The results show that the 20/8/5 has more Joules losses than 12/8/3 but lower magnet eddy current losses. Since the Joules losses can be easily evacuated more than the magnet losses, the 20/8/5 machine can be considered as the fault tolerant version of the 12/8/3 machine. Finally, the overall losses for the two machines are computed, the losses in 20/8/5 machine are less than in 12/8/3 machine. A finite element calculation is carried out in order to validate the analytical predictions.
Fichier(s) constituant cette publication
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Documents liés
Visualiser des documents liés par titre, auteur, créateur et sujet.
-
Article dans une revue avec comité de lectureFor three-phase induction machines supplied by sinusoidal current, it is usual to model the n-bar squirrel-cage by an equivalent two-phase circuit. For a multiphase induction machine which can be supplied with different ...
-
Article dans une revue avec comité de lectureGONG, Jinlin; ZAHR, Hussein; TRABELSI, Mohamed; ASLAN, Bassel; SEMAIL, Eric; SCUILLER, Franck (Institute of Electrical and Electronics Engineers, 2018)In the context of traction drives with required torque transient capabilities and a classically wide flux weakening speed range, this paper gives design considerations of a particular Double-Polarity (DP) five-phase machine. ...
-
Communication avec acteIn this paper, the possibility of designing a fivephase Surface-mounted Permanent Magnet (SPM) machine with 20 slots and 8 poles for a low power marine propulsion system is examined. Due to its particular winding and surface ...
-
Article dans une revue avec comité de lectureBECKER, Florent; ZAHR, Hussein; SEMAIL, Eric; SCUILLER, Franck (Institute of Electrical and Electronics Engineers, 2020)If multi-phase machines equipped with tooth concentrated winding with half a slot per pole and per phase offer interesting characteristics (simplified manufacturing, no space subharmonic, fault-tolerant ability), their low ...
-
Article dans une revue avec comité de lectureZAHR, Hussein; SEMAIL, Eric; SCUILLER, Franck (Institute of Electrical and Electronics Engineers, 2016)Abstract—In this paper, the study of the torque and power versus speed characteristics for a family of five-phase Surface-mounted Permanent Magnet (SPM) machine is carried out. With considering hypotheses (linear magnetic ...