Potential fatigue strength improvement of AA 5083-H111 notched parts by wire brush hammering: Experimental analysis and numerical simulation
Article dans une revue avec comité de lecture
JournalMaterials and Design
The effects of milling as machining process and a post-machining treatment by wire-brush hammering, on the near surface layer characteristics of AA 5083-H111 were investigated. Surface texture, work-hardening and residual stress profiles were determined by roughness measurement, scanning electron microscope (SEM) examinations, microhardness and X-ray diffraction (XRD) measurements. The effects of surface preparation on the fatigue strength were assessed by bending fatigue tests performed on notched samples for two loading stress ratios R0.1 and R0.5. It is found that the bending fatigue limit at R0.1 and 107 cycles is 20% increased, with respect to the machined surface, by wire-brush hammering. This improvement was discussed on the basis of the role of surface topography, stabilized residual stress and work-hardening on the fatigue-crack network nucleation and growth. The effects biaxial residual stress field and surface work-hardening were taken into account in the finite element model. A multi-axial fatigue criterion was proposed to predict the fatigue strength of aluminum alloy notched parts for both machined and treated states.
Fichier(s) constituant cette publication
- PIMM - MD - SIDHOM - 2014.pdf
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Visualiser des documents liés par titre, auteur, créateur et sujet.
Numerical and experimental analysis of residual stress and plastic strain distributions in machined stainless steel Article dans une revue avec comité de lectureBEN MOUSSA, Naoufel; SIDHOM, Habib; BRAHAM, Chedly (Elsevier, 2012)In this study, a numerical approach has been developed to predict the near surface residual stresses and plastic strain resulting from turning in orthogonal cutting configuration. This approach is based on the Arbitrary ...
Effect of machining processes on the residual stress distribution heterogeneities and their consequences on the stress corrosion cracking resistance of AISI 316L SS in chloride medium Article dans une revue avec comité de lectureRHOUMA, Amir Ben; SIDHOM, Naziha; MAKHLOUF, Kamel; SIDHOM, Habib; BRAHAM, Chedly; GONZÁLEZ, Gonzalo (Springer Verlag, 2019)The effects of machining such as grinding and turning on the microstructural and mechanical changes of the machined surfaces of AISI 316L stainless steel (SS) have been studied. Surface aspects and surface defects have ...
Article dans une revue avec comité de lectureYAHYAOUI, Houda; BEN MOUSSA, Naoufel; BRAHAM, Chedly; SIDHOM, H; BEN FREDJ, N (Wiley-Blackwell, 2015)Machining defects as rebuilt material and dislodgement were often induced by cutting of difficult to machining AISI 304 stainless steel. Their density increases with a decreasing of cutting speed. The effect of these defects ...
Assessment of low cycle fatigue improvement of machined AISI 316 stainless steel by brush hammering Article dans une revue avec comité de lectureSIDHOM, Naziha; MAKHLOUF, Kamel; KHLIFI, Ammar; BRAHAM, Chedly; SIDHOM, Habib (Wiley-Blackwell, 2014)The effects of wire brush hammering on low cycle fatigue behaviour of AISI 316 austenitic stainless steel has been investigated on turned samples through an experimental study combining strain controlled fatigue tests, ...
Article dans une revue avec comité de lectureMAKHLOUF, Kamel; SIDHOM, Naziha; KHLIFI, Ammar; SIDHOM, Habib; BRAHAM, Chedly (Elsevier, 2013)The effects of hammering by wire brush as a method of improving low cycle fatigue life of highly ductile austenitic stainless steel AISI 304 have been investigated through an experimental study combining imposed strain ...