In situ analysis of the influence of twinning on the strain hardening rate and fracture mechanism in AZ31B magnesium alloy
Article dans une revue avec comité de lecture
JournalJournal of Materials Science
The influence of twinning on the strain hardening rate and fracture mechanism in AZ31B magnesium alloy was studied in this work by in situ microstructural analysis during tensile testing in a chamber of scanning electron microscope. Three types of samples used in this study were obtained by (1) extrusion (as-supplied), (2) I-ECAP and (3) I-ECAP followed by side upsetting. Microstructures, textures and mechanical properties were examined after each processing step. An analytical equation was used to describe flow stress curves of the samples which exhibited various modes of deformation (1) only by slip, (2) dominated by tensile twinning followed by slip and (3) dominated by contraction twinning followed by slip. It was shown that tensile twinning increases strain hardening rate, while the opposite is observed for contraction twinning. The effective Schmid factors for slip in volumes deformed by tensile and contraction twinning were determined in this work using modelling approach as 0.215 and 0.45, respectively. Contraction twinning was also revealed to be responsible for an earlier fracture of the extruded sample subjected to tension, since microcracking was shown explicitly to be initiated within twins.
Files in this item
Showing items related by title, author, creator and subject.
In situ analysis of the influence of twinning on the strain hardening rate and fracture mechanism in AZ31B magnesium alloy Article dans une revue avec comité de lectureGZYL, Michal; PESCI, Raphaël; ROSOCHOWSKI, Andrzej; BOCZKAL, Sonia; OLEJNIK, Lech (Springer Verlag, 2015)The influence of twinning on the strain hardening rate and fracture mechanism in AZ31B magnesium alloy was studied in this work by in situ microstructural analysis during tensile testing in a chamber of scanning electron ...
Article dans une revue avec comité de lectureGZYL, Michal; ROSOCHOWSKI, Andrzej; PESCI, Raphaël; OLEJNIK, Lech; YAKUSHINA, Evgenia; WOOD, Paul (Springer Verlag/ASM International, 2014)Incremental equal channel angular pressing (I-ECAP) is a severe plastic deformation process used to refine grain size of metals, which allows processing very long billets. As described in the current article, an AZ31B ...
Dose, image quality and spine modeling assessment of biplanar EOS micro-dose radiographs for the follow-up of in-brace adolescent idiopathic scoliosis patients. Article dans une revue avec comité de lectureMOREL, Baptiste; MOUEDDEB, Sonia; BLONDIAUX, Eleonore; RICHARD, Stephen; BACHY, Manon; VIALLE, Raphael; LE POINTE, Hubert Ducou (Springer Verlag, 2018)Purpose: The aim of this study was to compare the radiation dose, image quality and 3D spine parameter measurements of EOS low-dose and micro-dose protocols for in-brace adolescent idiopathic scoliosis (AIS) patients. ...
Article dans une revue avec comité de lectureLARIBOU, Hicham; FRESSENGEAS, Claude; ENTEMEYER, Denis; JEANCLAUDE, Veronique; PESCI, Raphaël; TAZIBT, Abdel (Royal Society, The, 2012)The technology of nitrogen jets impacting surfaces at low temperature has recently been introduced for surface cleaning/stripping. Under the impact of the jet, the material surface undergoes a thermomechanical shock inducing ...
Micromachine d'essais mécaniques de type traction et compression ayant une accessibilité optimisée BrevetPESCI, Raphaël; BOMONT, Olivier; WARY, Marc; BIANCHIN, Jeremy; SIMON, Lionel; BOEHM, Daniel; HECKER, Jean-Michel; PEIFFERT, Xavier (2015)L'invention concerne une micromachine de traction destinée à être utilisée dans une enceinte de microscope électronique à balayage ou avec un appareil de diffraction, comportant deux mors (1) portés par deux supports, ...