Prediction of Springback After Draw‐Bending Test Using Different Material Models
Communication avec acte
Abstract
Within the framework of sheet metal forming, the importance of hardening models for springback predictions has been often emphasized. While some specific applications require very accurate models, in many common situations simpler (isotropic hardening) models may be sufficient. In these conditions, investigation of the impact of hardening models requires well defined test configurations and accurate measurements to generate the reference data. Specific draw-bend tests have been especially conceived for this purpose. In this work, such a draw-bending experimental device has been designed, for use on a biaxial tension machine. Three different steel sheets have been tested (one mild steel sheet and two HSS sheets) with thicknesses between 0.8 and 2 mm. Up to three different back-force levels were used for the tests. Wall curvatures and springback angles were measured. Finite element simulations of the tests were performed. A parameter sensitivity analysis has been carried out in order to determine the numerical parameters ensuring accurate springback results. The tests were simulated using an isotropic hardening model and a combined isotropic-kinematic hardening model. The impact of the hardening model is explored for the various test configurations and conclusions are drawn concerning their relative importance.
Files in this item
- Name:
- AMPT 2010 - Racz et al-AIP.pdf
- Size:
- 1.516Mb
- Format:
- Description:
- Article-AIP-Racz-et-al-2010
Related items
Showing items related by title, author, creator and subject.
-
Article dans une revue avec comité de lectureCHALAL, Hocine; RACZ, Sever-Gabriel; BALAN, Tudor (Elsevier, 2012)The springback behavior of four advanced high-strength sheet steels (Dual-Phase, TRIP, ferrite-bainite) with thicknesses ranging from 1.2 to 4 mm was investigated by means of the bending-under-tension (BUT) test. The ...
-
Article dans une revue avec comité de lectureCHALAL, Hocine; RACZ, Sever-Gabriel; BALAN, Tudor (Trans Tech Publications, 2012)In this paper, we investigate the springback behavior of several advanced high-strength sheet steels (TRIP, Dual-Phase, ferrite-bainite) with thicknesses up to 4 mm. Samples were tested by means of the bending-under-tension ...
-
Communication avec acteSALAHOUELHADJ, Abdellah; CHALAL, Hocine; ABED-MERAIM, Farid; BALAN, Tudor (Onate, E; Owen, DRJ; Peric, D; Suarez, B, 2011)In this contribution, the formulation of the SHB8PS continuum shell finite element is extended to anisotropic elastic-plastic behavior models with combined isotropic-kinematic hardening at large deformations. The resulting ...
-
Article dans une revue avec comité de lectureSALAHOUELHADJ, Abdellah; ABED-MERAIM, Farid; CHALAL, Hocine; BALAN, Tudor (Springer Verlag, 2012)This paper proposes an extension of the SHB8PS solid–shell finite element to large strain anisotropic elasto-plasticity, with application to several non-linear benchmark tests including sheet metal forming simulations. ...
-
Article dans une revue avec comité de lectureSALAHOUELHADJ, Abdellah; ABED-MERAIM, Farid; CHALAL, Hocine; BALAN, Tudor (2011)In this contribution, the formulation of the SHB8PS continuum shell finite element is extended to anisotropic elastic-plastic behavior models with combined isotropic-kinematic hardening at large deformations. The resulting ...