Application of the PGD and DEIM to solve a 3D Non-Linear Magnetostatic Problem coupled with the Circuit Equations
Article dans une revue avec comité de lecture
Auteur
HENNERON, Thomas 
CLENET, StephaneRésumé
Among the model order reduction techniques, the Proper Generalized Decomposition (PGD) has shown its efficiency to solve static and quasistatic problems in the time domain. However, the introduction of nonlinearity due to ferromagnetic materials for example has never been addressed. In this paper, the PGD technique combined with the Discrete Empirical Interpolation Method (DEIM) is applied to solve a non-linear problem in magnetostatic coupled with the circuit equations. To evaluate the reduction technique, the transient state of a three phase transformer at no load is studied using the full Finite Element model and the PGD_DEIM model.
Fichier(s) constituant cette publication
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Documents liés
Visualiser des documents liés par titre, auteur, créateur et sujet.
-
Article dans une revue avec comité de lecture; ; ;CLENET, Stephane (Institute of Electrical and Electronics Engineers, 2016)
To study a multirate system, each subsystem can be solved by a dedicated sofware with respect to the physical problem and the time constant. Then, the problem is the coupling of the solutions of the subsystems. The Waveform ...
-
Article dans une revue avec comité de lecture; ; ;CLENET, Stephane (Wydawnictwo Czasopism i Ksia̜żek Technicznych Sigma, 2015)
The modelling of a multirate system -composed of components with heterogeneous time constants- can be done using fixed-point method. This method allows a time-discretization of each subsystem with respect to its own time ...
-
Model-Order Reduction of Magnetoquasi-Static Problems Based on POD and Arnoldi-Based Krylov Methods Communication avec acte; ; ;CLENET, Stephane (IEEE, 2015)
The proper orthogonal decomposition method and Arnoldi-based Krylov projection method are investigated in order to reduce a finite-element model of a quasi-static problem. Both methods are compared on an academic example ...
-
Article dans une revue avec comité de lecture; ; ;CLENET, Stephane (Institute of Electrical and Electronics Engineers, 2014)
We present an optimization problem that requires to model a multirate system, composed of subsystems with different time constants. We use waveform relaxation method in order to simulate such a system. But computation time ...
-
Article dans une revue avec comité de lecture;CLENET, Stephane (Institute of Electrical and Electronics Engineers, 2016)
To solve a parametric model in computational electromagnetics, the Finite Element method is often used. To reduce the computational time and the memory requirement, the Finite Element method can be combined with Model Order ...