Inviscid approach for upwind sails aerodynamics. How far can we go?
Article dans une revue avec comité de lecture
This work presents a full-scale experimental study of a yacht rig and sails in real upwind sailing conditions and a comparison with Fluid Structure Interaction (FSI) simulations with the ARAVANTI model (Finite Element Method for the structure and Vortex Lattice Method for the fluid). An specific on-board instrumentation system simultaneously measures loads in the rig and sails, sailing data (wind, boat attitude and speed) and the shape of sails in real navigation conditions (flying shape). Flying shape parameters are extracted using the camera-based VSPARS system to characterize the effects of sail trims and to be compared with the results of the simulation. The potential flow solver gives fast and accurate predictions of both the flying shape and the loads in the rig in most conditions. The inviscid approach, commonly used in the early stage of design, must be checked, as in particular cases where the sails are heavily loaded, flow separation is significant and results from a potential flow solver are inaccurate. A new version of the model including the heel angle as an additional degree of freedom in the structural solver enables to detect when the inviscid flow approach overestimates the aerodynamic load. This upgrade improves the utility and reliability of the inviscid flow approach which remains relevant at the early stages of design as it is much more cost-effective than RANS models.
Showing items related by title, author, creator and subject.
Article dans une revue avec comité de lectureAUBIN, Nicolas; AUGIER, Benoit; SACHER, Matthieu; BOT, Patrick; HAUVILLE, Frédéric; FLAY, Richard G.J. (The Society of Naval Architects and Marine Engineers, 2017)An experiment was performed in the Yacht Research Unit’s Twisted Flow Wind Tunnel (University of Auckland) to test the effect of dynamic trimming on three IMOCA 60 inspired mainsail models in an upwind ( AW = 60°) unheeled ...
Communication avec acteAUBIN, Nicolas; AUGIER, Benoit; BOT, Patrick; HAUVILLE, Frédéric; SACHER, Matthieu; FLAY, Richard G.J. (2016)An experiment was performed in the Yacht Research Unit’s Twisted Flow Wind Tunnel (University of Auckland) to test the effect of dynamic trimming on three IMOCA 60 inspired mainsail models in an upwind (AWA = 60 ) unheeled ...
Communication avec acteAUBIN, Nicolas; DHOME, Ulisse; AUGIER, Benoit; BOT, Patrick; HAUVILLE, Frédéric (2016)Pumping or flicking1 is often used by sailors to get extra propulsion while sailing (subject to restrictions by the racing rules2). Common unsteady sailing situations, due to crew action (e.g. manoeuver like gybing3) or ...
Numerical study of a Flexible Sail Plan submitted to pitching : Hysteresis phenomenon and effect of rig Adjustments Article dans une revue avec comité de lectureAUGIER, Benoit; HAUVILLE, Frédéric; BOT, Patrick; AUBIN, Nicolas; DURAND, Mathieu (Elsevier, 2014)A numerical investigation of the dynamic Fluid Structure Interaction (FSI) of a yacht sail plan submitted to harmonic pitching is presented to analyse the system's dynamic behaviour and the effects of motion simplifications ...
Performance enhancement of downwind sails due to leading edge flapping: A wind tunnel investigation Article dans une revue avec comité de lectureAUBIN, Nicolas; AUGIER, Benoit; DEPARDAY, Julien; SACHER, Matthieu; BOT, Patrick (Elsevier, 2018)This work presents a wind tunnel experimental study on the effect of the leading edge flapping on the aerodynamic performance of a spinnaker. Four J80-class spinnaker models, combining two different assembling structures ...