Thermal finite-difference modeling of machining operations in polymers
Article dans une revue avec comité de lecture
Auteur
BAIZEAU, ThomasMOUREAUX, CaroleROSSI, FredericRésumé
Polymer materials are known to be easily damaged by temperature reached during machining operations. A two-dimensional finite-difference model is established to predict the temperature in orthogonal cutting. Calculations are validated with experiments carried out on polyurethane samples with various cutting speeds and depths of cut. The cutting temperatures are measured by thermocouples embedded within the workpiece and the tool cutting edge. The model provides a three dimensional thermal field of the workpiece with an accuracy of 20 K.
Fichier(s) constituant cette publication
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Documents liés
Visualiser des documents liés par titre, auteur, créateur et sujet.
-
Article dans une revue avec comité de lecture(Elsevier, 2016)Surface integrity prediction of hard machining using PCBN cutting tools remains a major topic for many high value added applications. A Flamant–Boussinesq (FB) analytical model has initially been applied for surface integrity ...
-
Communication avec acte(Elsevier, 2015)In the case of hard machining of steels, negative rake tools generate compressive deformation and high temperature under the cutting edge, leading to phase transformation or ”white layers”. The resulting surface integrity ...
-
Article dans une revue avec comité de lecture(Elsevier, 2016)Conventional piezoelectric sensors cannot record the force fluctuations at high frequencies to monitor serrated chip formation. Recently, force measurements by using digital image correlation (DIC) have been reported thanks ...
-
Article dans une revue avec comité de lecture(Society for Experimental Mechanics, 2017)The measurement of machined-part strain fields induced by the cutting process remains a challenge because of the presence of highly intensive and localised strains. In this study, a high-speed double-frame imaging device ...
-
Article dans une revue avec comité de lecture(De Gruyter, 2013)The thermal properties of wood in the green state have been determined by the transient plane source (TPS) technique. Data are presented on thermal conductivity ( λ ), heat capacity ( C ), and thermal diffusivity ( κ ) at ...