Error localization and updating of junction properties for an engine cradle model
Communication avec acte
Extending the bandwidth of validity of FEM models used in vibroacoustic design is a generic objective of model generation processes. Achieving this objective requires a critical review of both testing and modeling processes. Using the case study of an engine cradle, tools used to detect modal test inconsistencies are first illustrated. On the modeling side, weld spots and lines and variations of thickness due to press forming are shown to have relatively minor impact when compared to the contact surfaces. Usual junction simplifications are also shown to play a major role particularly at higher frequencies where more localized modeshapes occur.
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Visualiser des documents liés par titre, auteur, créateur et sujet.
Communication avec acteMARTIN, Guillaume; BALMES, Etienne; VERMOT DES ROCHES, Guillaume; CHANCELIER, Thierry (2015)To be confident in the prediction capability of a model, verification and validation steps are classically performed. Verification checks that the model is properly solved. Since the model used are fairly standard, this ...
Squeal measurement with 3D Scanning Laser Doppler Vibrometer: handling of the time varying system behavior and analysis improvement using FEM expansion Communication avec acteMARTIN, Guillaume; CHANCELIER, Thierry; VERMOT DES ROCHES, Guillaume; BALMES, Etienne (2018)In the presence of squeal, Operational Deflection Shapes (ODS) are classically performed to analyze behavior. A simple numeric example is used to show that two real shapes should dominate the response. This justifies an ...
Communication avec acteMARTIN, Guillaume; BALMES, Etienne; VERMOT DES ROCHES, Guillaume; CHANCELIER, Thierry (2016)Squeal occurrences are quite common in brakes in production and involve coupling of modes. Detailed understanding of vibration patterns typically requires FEM models updated using test results. The process used at Chassis ...
Communication avec acteMARTIN, Guillaume; VERMOT DES ROCHES, Guillaume; BALMES, Etienne; CHANCELIER, Thierry (2019)In brake FEM, model updating is often needed to improve the model accuracy and well describe problematic phenomena such as the squeal. To avoid performing a full model updating which is often time consuming, the use of the ...
Expansion in structural dynamics : a perspective gained from success and errors in test/FEM twin building Communication avec acteBALMES, Etienne; MARTIN, Guillaume; VERMOT DES ROCHES, Guillaume; CHANCELIER, Thierry; THOUVIOT, Sylvain (Université Polytechnique Hauts de France (UPHF), 2022-05)Since tests only provide measurements at sensors, it is interesting to use models to estimate the response at all degree of freedom, correct measurement errors and possibly allow updating of model parameters. The paper ...