MDRE: an efficient expansion tool to perform model updating from squeal measurements
TypeCommunications avec actes
In brake FEM, model updating is often needed to improve the model accuracy and well describe problematic phenomena such as the squeal. To avoid performing a full model updating which is often time consuming, the use of the Minimum Dynamic Residual Expansion method is proposed to help building the updating strategy. The procedure proposed in this paper is evaluated on a disc brake system, using experimental measurements and the nominal model as input data. From experimental squeal measurements, two shapes are extracted and expanded on the current model. The evaluation of the residual error of model shows areas where the model is wrong and guides through the definition of sensitive parameters which need to be updated. Once the model is parameterized, a model reduction strategy is proposed for further computations to be performed in a time compatible with industrial processes. A parametric study is then achieved: the expansion is computed for all the combinations of the chosen parameters. It is finally possible to navigate through the expansion results for all the parameters, evaluate the evolution of the model accuracy and extract the best combination which improves the model representability.
Files in this item
Showing items related by title, author, creator and subject.
MARTIN, Guillaume; BALMES, Etienne; VERMOT DES ROCHES, Guillaume; CHANCELIER, Thierry (2016)Squeal occurrences are quite common in brakes in production and involve coupling of modes. Detailed understanding of vibration patterns typically requires FEM models updated using test results. The process used at Chassis ...
Squeal measurement using operational deflection shape. Quality assessment and analysis improvement using FEM expansion. BALMES, Etienne; VERMOT DES ROCHES, Guillaume; CHANCELIER, Thierry; MARTIN, Guillaume (FISITA, 2017)In presence of squeal, Operational Deflection Shapes (ODS) are classically measured to gain understanding of brake behavior. A simple numeric example is analyzed to justify the use of time-frequency analysis and shows that ...
MARTIN, Guillaume; BALMES, Etienne; VERMOT DES ROCHES, Guillaume; CHANCELIER, Thierry (2015)To be confident in the prediction capability of a model, verification and validation steps are classically performed. Verification checks that the model is properly solved. Since the model used are fairly standard, this ...
Squeal measurement with 3D Scanning Laser Doppler Vibrometer: handling of the time varying system behavior and analysis improvement using FEM expansion MARTIN, Guillaume; CHANCELIER, Thierry; VERMOT DES ROCHES, Guillaume; BALMES, Etienne (2018)In the presence of squeal, Operational Deflection Shapes (ODS) are classically performed to analyze behavior. A simple numeric example is used to show that two real shapes should dominate the response. This justifies an ...
The Component Mode Tuning (CMT) method. A strategy adapted to the design of assemblies applied to industrial brake squeal VERMOT DES ROCHES, Guillaume; REJDYCH, Gabriel; BALMES, Etienne; CHANCELIER, Thierry (2014)Numerical prototyping is widely used in industrial design processes, allowing optimization and limiting validation costs through experimental testing. Industrial applications nowadays focus on the simulation of complex ...